Watch now! | 08-11-2018 – Naam Iruvar Namaku Iruvar Vijay Tv... | 60 Days In - Undercover im Knast (15)

Rajasthan Technical University Kota Teaching and Examination


Rajasthan Technical University Kota

Teaching and Examination Scheme for B.Tech. (Four year courses) Branch

Electrical & Electronics Engg.





Branch Code


Semester III Hrs./Week Duration Maximum Marks Total of Exam. IA Code Subject Lecture Tutorial Practical Exam (Hrs) 3 20 3EX1 Mathematics-III 3 1 80 100 3 1 3 20 80 100 3EX2 Object Oriented Programming using C++ 3EX3 Circuit Analysis & synthesis 3 1 3 20 80 100 3EX4 Electronics devices &Circuits 3 1 3 20 80 100 3EX5 Electrical & Electronics measurement 3 0 3 20 80 100 3EX6.1 Data structure and Algorithm 3 0 3 20 80 100 3EX6.2 3EX6.3 3EX6.4 3EX7 Computer Programming Lab 2 2 45 30 75 3EX8 Circuit Analysis Lab 2 2 60 40 100 3EX9 Electronics Devices & Circuits Lab 3 2 60 40 100 2 2 45 30 75 3EX10 Electrical & Electronics measurement lab 3EX11 0 3EXDC Discipline/Extra-Curricular Activities 50 Total 18 4 9 330 620 1000 Total Teaching hours 31

Code Subject 4EX1 Electrical Machines-I 4EX2 Digital Electronics 4EX3 Electrical Engg. Materials 4EX4 Applied Electronics 4EX5 Linear Integrated circuits 4EX6.1 Electromagnetic Field Theory 4EX6.2 4EX6.3 4EX6.4 4EX7 Electrical Machines Lab-I 4EX8 Digital Electronics Lab 4EX9 Applied Electronics Lab 4EX10 Integrated circuit Lab 4EX11 4EXDC Discipline/Extra-Curricular Activities Total Total Teaching hours

Semester IV Hrs./Week Duration Maximum Marks Lecture Tutorial Practical of Exam. IA Exam (Hrs) 3 20 3 1 80 3 1 3 20 80 3 1 3 20 80 3 1 3 20 80 3 0 3 20 80 3 0 3 20 80

3 3 3 2

18 33



2 2 2 2

60 45 60 45


Total 100 100 100 100 100 100

40 100 30 75 40 100 30 75


50 1000

Rajasthan Technical University Kota

Electrical & Electronics Engg. Year


Semester V Hrs./Week Duration Maximum Marks Total of Exam. IA Code Subject Lecture Tutorial Practical Exam (Hrs) 3 20 5EX1 Power Electronics 3 1 80 100 5EX2 Electrical machines -II 3 1 3 20 80 100 5EX3 Control Systems 3 1 3 20 80 100 5EX4 Analog Communication 3 0 3 20 80 100 5EX5 Trans. and Distri. of Elect. Power 3 0 3 20 80 100 5EX6.1 Biomedical Instrumentation 3 0 3 20 80 100 5EX6.2 Object Oriented Programming using Java 5EX6.3 Introduction to VLSI 5EX6.4 5EX7 Power Electronics Lab 2 2 45 30 75 5EX8 Electrical Machines Lab - II 2 2 45 30 75 5EX9 Control System Lab 2 2 45 30 75 5EX10 Power System Design Lab 2 2 45 30 75 5EX11 Entrepreneurship Development 2 30 20 50 5EXDC Discipline/Extra-Curricular Activities 50 Total 18 3 10 330 620 1000 Total Teaching hours 31 Year


Semester VI Hrs./Week Duration Maximum Marks Lecture Tutorial Practical of Exam. IA Exam (Hrs) 3 20 3 1 80 3 1 3 20 80 3 1 3 20 80 3 1 3 20 80 3 0 3 20 80 3 0 3 20 80

Code Subject 6EX1 Modern Control Theory 6EX2 Microprocessor & Microcontroller 6EX3 Protection of Power System 6EX4 Advanced Power Electronics 6EX5 Data Structures in C 6EX6.1 Neural Networks 6EX6.2 Advanced Microprocessors 6EX6.3 Digital Communication & Info. Theory 6EX6.4 6EX7 Microprocessor Lab 6EX8 Power System Lab 6EX9 MATLAB Programming Lab 6EX10 Advanced Power Electronics Lab 6EX11 6EXDC Discipline/Extra-Curricular Activities Total 18 Total Teaching hours 32

2 3 2 3



2 2 2 2

45 60 45 60


Total 100 100 100 100 100 100

30 75 40 100 30 75 40 100 0 50 620 1000

Rajasthan Technical University Kota

Electrical & Electronics Engg. Year

Semester VII Hrs./Week Duration Maximum Marks Code Subject Lecture Tutorial Practical of Exam. IA Exam (Hrs) 3 7EX1 Database Management Systems 3 1 20 80 7EX2 Power System Analysis 3 1 3 20 80 7EX3 Artificial Intelligence Techniques 3 1 3 20 80 7EX4 Utilization of Electrical Power 3 0 3 20 80 7EX5 Power System Engineering 3 0 3 20 80 7EX6.1 Digital Signal Processing 3 0 3 20 80 7EX6.2 Computer Aided Des. of Elect. Machines 7EX6.3 Operating System 7EX6.4 7EX7 DBMS Lab 3 2 60 40 7EX8 Power System Modelling & Sim. Lab 3 2 60 40 7EX9 Project Stage I 2 50 7EX10 Practical Training & Industrial Visit 2 60 40 7EX11 7EXDC Discipline/Extra-Curricular Activities Total 18 3 10 350 600 Total Teaching hours 31

Year Code 8EX1 8EX2 8EX3


IV Subject EHV AC/DC Transmission Electric Drives & their Control Switch Gear & Protection

Semester VIII Hrs./Week Duration Maximum Marks Lecture Tutorial Practical of Exam. IA Exam (Hrs) 3 20 3 1 80 3 1 3 20 80 3 1 3 20 80

8EX4.1 Image Processing and Pattern Recognitio 3 8EX4.2 VHDL 8EX4.3 Non conventional energy Sources 8EX4.4 Robotics & Automation 8EX5 Industrial Economic & Management 8EX6 Electrical Drives & Control Lab 8EX7 8EX8 Seminar 8EX9 Project Stage II 8EXDC Discipline/Extra-Curricular Activities Total 12 Total Teaching hours 27


Total 100 100 100 100 100 100

100 100 50 100 50 1000

Total 100 100 100





2 4

2 2

60 90

40 60

2 4


60 120

40 80



100 150 0 100 200 50 1000


B. TECH. ELECTRICAL & ELECTRONICS ENGINEERING III-SEMESTER 3EX1 MATHEMATICS-III Unit-1 LAPLACE TRANSFORM: Laplace transform with its simple properties, applications to the Solution of ordinary and partial differential equations having constant coefficients with special reference to wave and diffusion equations, digital transforms. Unit-2 FOURIER TRANSFORM: Discrete Fourier transform, Fast Fourier transform, Complex form of Fourier transform and its inverse applications, Fourier transform for the solution of partial differential equations having constant coefficients with special reference to heat equation and wave equation. Unit-3 FOURIER SERIES: Expansion of simple functions in Fourier series, half range series, changes of interval, harmonic analysis. CALCULUS OF VARIATION: Functional, strong and weak variations, simple variation problems, Euler’s equation Unit-4 COMPLEX VARIABLES: Analytic functions, Cauchy-Riemann equations, Elementary conformal mapping with simple applications, Line integral in complex domain, Cauchy’s theorem, Cauchy’s integral formula. Unit-5 COMPLEX VARIABLES: Taylor’s series, Laurent’s series, poles, Residues. Evaluations of simple definite real integrals using the theorem of residues. Simple contour integration. Reference/Suggested Books 1. M.Ray, J.C. Chaturvedi & H.C. Sharma – Differential Equations. Pub: Students friends & company 2. Chandrika Prasad – Mathematics for Engineers, Prasad Mudralaya 3. Bird-Higher Engineering mathematics , ELSEVIER 4. Jeffrey-Advanced Engineering Mathematics , ELSEVIER 5. Chandrika Prasad – Advanced Mathematics for Engineers, Prasad Mudralaya 6. B.S. Grewal – Higher Engineering Mathematics. Khanna Publications 7. Ervin Kreyzig - Advanced Engineering Maths, Wiley. 3EX2 OBJECT ORIENTED PROGRAMMING USING C++ Unit-1 PROGRAMMING IN C: Review of basics of C. structure & pointer type. Variables. Singly and doubly linked lists. I/O and text file handling. Command line arguments. Unit-2 OOP FUNDAMENTALS: Concept of class and object. Attributes, public, private and protected members. Derived classes. Single & multiple inheritances. Unit-3 PROGRAMMING IN C++: Enhancements in C++ over C in data types, operators and functions. Inline functions, constructors and destructors. Friend function. Function and operator overloading. Unit-4 Working with class and derived classes. Single and. multiple and multilevel inheritances and their combinations. Virtual functions, pointers to objects.

Unit-5 Working with text files. Templates. File handling in C++, Input output flags and formatting operations. Reference/Suggested Books 1. E. Balaguruswamy: Programming in ANSI C 4/e TMH 2. E. Balaguruswamy: Object Oriented Programming in C++ 4/e TMH 3. SAHAY: OBJECT ORIENTED PROGRAMMING WITH C++ , Oxford 4. HUBBARD : Programming with C++ 3/e (SIE) (Schaum's Outline Series) 5. C Gottfried: Programming in C, Schaum Series 6. Rambaugh James etal, "Object Oriented Design and Modeling",PHI-1997 7. Budd, Timothy, "An Introduction to Object Oriented Programming", Pearson 2000 3EX3 CIRCUIT ANALYSIS & SYNTHESIS Unit-1 NETWORK THEOREMS AND ELEMENTS: Thevenin’s, Norton’s, Reciprocity, Superposition, Compensation, Miller’s, Tellegen’s and maximum power transfer theorems. Networks with dependent sources. Inductively coupled circuits - mutual inductance, coefficient of coupling and mutual inductance between portions of same circuits and between parallel branches. Transformer equivalent, inductively and conductively coupled circuits. Unit-2 TRANSIENT ANALYSIS: Impulse, step, ramp and sinusoidal response Analysis of first order and second order circuits. Time domain & transform domain (frequency, Laplace) analysis. Initial and final value theorems. Complex periodic waves and their analysis by Fourier analysis. Different kind of symmetry. Power in a circuit. Unit-3 NETWORK FUNCTIONS: Terminals and terminal pairs, driving point impedance transfer functions, poles and zeros. Procedure of finding network functions for general two terminal pair networks. Stability & causality Unit-4 TWO PORT NETWORKS: Two port parameters and their interrelations - z-parameters, y -parameters, h-parameters, ABCD parameters. Equivalence of two ports, transformer equivalent, interconnection of two port networks. Image parameters. Attenuation & phase shift in symmetrical T and Π Networks. Unit-5 NETWORK SYNTHESIS: Hurwitz polynomial, positive real function, reactive networks. Separation property for reactive networks. The four-reactance function forms, specification for reactance function. Foster form of reactance networks. Cauer form of reactance networks. Synthesis of R-L and R-C networks in Foster and Cauer forms. Reference/Suggested Books 1. M.E. Van Valkenburg, “An Introduction to Modern Network Synthesis”,Wiley Eastern 2. Nagsarkar & Sukhija : Circuits & Networks, Oxford 3. Choudhary D.Roy, “Network & Systems”, Wiley Eastern Ltd. 4. Ghosh & Chakrabarti: Network Analysis and Synthesis (TMH) 5. Samarajit Ghosh, “Network Theory: Analysis and Synthesis” Prentice Hall of India, 2008 6. A.Chakrabarti, “Circuit Theory” Dhanpat Rai & Co. 7. Umesh Sinha, Transmission Lines and Networks, Satya prakashan. 8. Murthy and Kamath, Basic Circuit Analysis, Jaico Publishing House. 9. Hayt & Kemmerly: Engineeirng Circuit Analysis 6/e (TMH) 10. J. Edminster & M. Nahvi: Electric Circuits (SIE), 5/e, Scaum’s Out Line. 11. John Bird-Electric Circuit Theory & Technology, ELSEVIER 3EX4 ELECTRONIC DEVICES & CIRCUITS Unit-1 SEMICONDUCTOR PHYSICS: Mobility and conductivity, charge densities in a

semiconductor, Fermi Dirac distribution, carrier concentrations and fermi levels in semiconductor, Generation and recombination of charges, diffusion and continuity equation, Mass action Law, Hall effect. Unit-2 Junction diodes, Diode as a circuit element, load line concept, clipping and clamping circuits, Voltage multipliers. Construction, characteristics and working principles of UJT Unit-3 Transistor characteristics, Current components, Current gains: alpha and beta. Operating point. Hybrid model, h-parameter equivalent circuits. CE, CB and CC configuration. DC and AC analysis of CE, CC and CB amplifiers. Ebers-Moll model. Biasing & stabilization techniques. Thermal runaway, Thermal stability. Unit-4 JFET, MOSFET, Equivalent circuits and biasing of JFET's & MOSFET’s. Low frequency CS and CD JFET amplifiers. FET as a voltage variable resistor. Unit-5 SMALL SIGNAL AMPLIFIERS AT LOW FREQUENCY: Analysis of BJT and FET, DC and RC coupled amplifiers. Frequency response, midband gain, gains at low and high frequency. Analysis of DC and differential amplifiers, Miller's Theorem. Cascading Transistor amplifiers, Darlington pair. Emitter follower, source follower. Reference/Suggested Books 1. J. Millman's & C. Halkias–Integrated Electronics: Analog & Digital Circuits Systems,2/e TMH 2. David A. Bell – Electronic Devices and Circuits, 5th Ed Oxford. 3. Millman & Halkias- Millmans Electronic Devices & Circuits 2/e TMH 4. Robert L. Boylested & Louis Nashelshky– Electronic Devices and Circuit theory, PHI 5. Allen Mottershed – Electronic Devices and Circuits, PHI. 6. Jacob Millman, Arvin Grabel, Microelectronics, TMH. 7. Salivahanan: Electronic Devices and Circuits, TMH 3EX5 ELECTRICAL & ELECTRONIC MEASUREMENTS Unit-1 THEORY OF ERRORS: Accuracy & precision, Repeatability, Limits of errors, Systematic & random errors Modeling of errors, Probable error & standard deviation, Gaussian error analysis, Combination of errors. Unit-2 ELECTRONIC INSTRUMENTS FOR MEASURING BASIC PARAMETERS: Electronic Voltmeter, Electronic Multimeters, Digital Voltmeter, Component Measuring Instruments, Q meter, Vector Impedance meter, RF Power & Voltage Measurements. Measurement of frequency. Introduction to shielding & grounding. Unit-3 OSCILLOSCOPES: CRT Construction, Basic CRO circuits, CRO Probes, Oscilloscope Techniques of Measurement of frequency, Phase Angle and Time Delay, Multibeam, multi trace, storage& sampling Oscilloscopes. Curve tracers. Diaphragms, Seismic Accelerometers, Tachogenerators, Load Cell, Piezoelectric Transducers, Ultrasonic Flow Meters. Unit-4 SIGNAL GENERATION: Sine wave generators, Frequency synthesized signal generators, Sweep frequency generators. Signal Analysis - Measurement Technique, Wave Analyzers, and Frequency - selective wave analyzer, heterodyne wave analyzer, Harmonic distortion analyzer, and Spectrum analyzer. Unit-5 TRANSDUCERS: Classification, Selection Criteria, Characteristics, Construction, Working Principles, Application of following Transducers- RTD, Thermocouples, Thermistors, LVDT, RVDT, Strain Gauges, Bourdon Tubes, Bellows. Diaphragms, Seismic Accelerometers, Tachogenerators, Load Cell, Piezoelectric Transducers, Ultrasonic Flow Meters

Reference/Suggested Books 1. H.S. Kalsi-Electronic Inst. & Measurement; Tata Mc-Graw Hill 2. Morris-Electrcal Measurements & Instrumentation , ELSEVIER 3. BELL: ELECTRONIC INSTRUMENTATION AND MEASUREMENT Oxford 4. W.D. Cooper-Electronic Inst. & Measurement Techniques; Prentice Hall, India. 5. A.K. Sawhney-Electrical & Electronic Measurement & Inst; Dhanpat Rai & Sons. 6. E.W. Golding & F.C. Widdis, “Electrical Measurement & Measuring Instrument”, A.W. Wheeler. 7. Forest K. Harries,“Electrical Measurement”,Willey Eastern Pvt. Ltd. India. 3EE6.1 DATA STRUCTURES & ALGORITHMS Unit-1 Data Structure: Definition, Implementation, Operation, Application, Algorithm writing and convention, Analysis of algorithm, Complexity Measures and Notations. Arrays: Representation of arrays (multidimensional), Address calculation using column and row major ordering. Linked Lists : Implementation, Doubly linked list, Circular linked list, unrolled linked list, skip-lists, Splices, Sentinel nodes, Application (Sparse Matrix, Associative Array, Functional Programming Unit-2 Stacks: Definition, Implementation, Application (Tower of Hanoi, Function Call and return, Parentheses Matching, Back-tracking, and Expression Evaluation) Queues: Definition, deque, enque, priority queue, bounded queue, Implementation, Application Unit-3 Tree: Definition of elements, Binary trees: Types (Full, Complete, Almost complete), Binary Search Tree, Traversal (Pre, In, Post & Level order), Pruning, Grafting. Application: Arithmetic Expressions Evaluation Variations: Indexed Binary Tree, Threaded Binary Tree, AVL tree, Multi-way trees, B tree, B+ tree, Forest, Trie and Dictionary Unit-4 Graphs: Elementary definition, Representation (Adjacency Matrix, Adjacency Lists) Traversal (BFS, DFS Application: Spanning Tree (Prim and Kruskal Algorithm), Dijkstra's algorithm, and shortest path algorithms. Unit-5 Sorting: Bubble, Selection, Insertion, Quick, Radix, Merge, Bucket, Heap, Hashing, Symbol Table, Binary Search, Simple String Searching


Reference/Suggested Books 1. Lipschutz: Data Structures (Schaum Series) TMH 2. Aho A.V., J.E.Hopcroft, J.D.Ullman: Data Structures and Algorithms, Addison Wesley. 3. Brassard: Algorithms, PHI 4. Horowitz and Sawhni : Algorithms, Design and analysis, CS Press. 5. Kruse R.L.: Data Structure and Program Design, PHI & Pearson Education. 6. Horowitz and Sawhni : Data Structures in PASCAL, BPB 7. Tanenbaum: Data Structures in C, PHI & Pearson Education. 8. Trembley & Sorenson: An Introduction to Data Structures, TMH. 9. Baase: Computer Algorithms, Pearson Education 3EX7 COMPUTER PROGRAMMING-I 1

Write a program to find the greatest between four numbers.



Write a program to prepare mark sheet of students using structure and class. Write a C program to read several different names and addresses. re-arrange the names in alphabetical order and print name in alphabetical order using structures and class. Write a program to implement concatenation of two strings using pointers.


Write a program to perform the complex arithmetic.


Write a program to perform the rational number arithmetic.


7 8

Write a program to perform the matrix operations. (Transpose, Subtraction , addition. multiplication, Test if a matrix is symmetric/lower triangular/ upper triangular) Implement Morse code to text conversion and vice-versa.


To calculate Greatest Common Divisor of given numbers.


To implement tower of Hanoi problem. Write a program to create a singly link list often students names and implement add node, delete node and isemptylist operations. Write a program to search a pattern in a given string.

11 12 13 14 15 16

Write a Program to read add, subtract and multiply integer matrices. Write a program to calculate the power function (m") using the function overloading technique; implement it for power of integer and double. Implement file creation and operate it in different modes: seek, tell, read, write and close operations. Using multiple inheritance, prepare students' mark sheet. Three classes containing marks for every student in three subjects. The inherited class generate mark sheet. 3EX8 CIRCUIT ANALYSIS LAB


Verification of principle of superposition with dc and ac Sources.


Verification of Thevenin, Norton's theorems in ac circuits.


Verification of Maximum power transfer theorem. 4 Determination of transient response of Current in RL and RC circuits with step voltage input. 5 Determination of transient response of current in RLC circuit with step voltage input for under damp, critically damp and over damp cases. 6 Determination of frequency response of current in RLC circuit with sinusoidal ac input. 7 Determination of z and h parameters (dc only) for a network and computation of Y and ABCD parameters. 8 Determination of driving point and transfer functions of a two-port ladder network and verify Y with theoretical values. 3EX9 ELECTRONICS DEVICES & CIRCUITS LAB 1 Study the following devices: (a) Analog & digital multimeters (b) Function/ Signal generators (c) Regulated d. c. power supplies (constant voltage and constant current operations) (d) Study of analog CRO, measurement of time period, amplitude, frequency & phase angle using Lissajous figures. 2 Plot V-I characteristic of P-N junction diode & calculate cut-in voltage, reverse Saturation current and static & dynamic resistances. 3 Plot V-I characteristic of zener diode and study of zener diode as voltage regulator. Observe the effect of load changes and determine load limits of the voltage regulator. 4 Plot frequency response curve for single stage amplifier and to determine gain bandwidth product. 5 Plot drain current - drain voltage and drain current - gate bias characteristics of field effect transistor and measure of Idss & Vp 6 Application of Diode as clipper & clamper 7 Plot gain- frequency characteristic of two stage RC coupled amplifier & calculate its bandwidth and compare it with theoretical value. 8 Plot gain- frequency characteristic of emitter follower & find out its input and output resistances. 9 Plot input and output characteristics of BJT in CB, CC and CE configurations. Find their h parameters.

10 Study half wave rectifier and effect of filters on wave. Also calculate theoretical & practical ripple factor. 11 Study bridge rectifier and measure the effect of filter network on D.C. voltage output & ripple factor. 3EX10 ELECTRICAL AND ELECTRONICS MEASUREMENT LAB 1 Measure earth resistance using fall of potential method. 2 Plot V-I characteristics & measure open circuit voltage & short circuit current of a solar panel. 3 Measure unknown inductance capacitance resistance using following bridges (a) Anderson Bridge (b) Maxwell Bridge 4 To measure unknown frequency & capacitance using Wein’s bridge. 5 Measurement of the distance with the help of ultrasonic transmitter & receiver. 6 Measurement of displacement with the help of LVDT. 7 Draw the characteristics of the following temperature transducers: (a) RTD (Pt-100) (b) Thermistors (c) Thermocouple 8 Draw the characteristics between temperature & voltage of a K type thermocouple 9 Measure the speed of a Table Fan using stroboscope. 10 Measurement of strain/ force with the help of strain gauge load cell. 11 Study the working of Q-meter and measure Q of coils. 12 To study the working of Spectrum analyzer and determine the bandwidth of different signals. B. TECH. ELECTRICAL & ELECTRONICS ENGINEERING IV-SEMESTER 4EX1 ELECTRICAL MACHINES-I Unit-1 ELECTROMECHANICAL ENERGY CONVERSION: Basic principles of Electromechanical energy conversion. Basic aspects and physical phenomena involved in energy conversion. Energy balance. Unit-2 DC GENERATORS: Construction, Types of DC generators, emf equation, lap & wave windings, equalizing connections, armature reaction, commutation, methods of improving commutations, demagnetizing and cross magnetizing mmf, interpoles, characteristics, parallel operation. Rosenberg generator. Unit-3 DC MOTORS: Principle, back emf, types, production of torque, armature reaction & interpoles, characteristics of shunt, series & compound motor, DC motor starting. Speed Control of DC Motor: Armature voltage and field current control methods, Ward Leonard method. Braking, losses and efficiency, direct & indirect test, Swinburne’s test, Hopkinsion test, field & retardation test, single-phase series motor. Unit-4 TRANSFORMERS: Construction, types, emf equation. No load and load conditions. Equivalent circuits, Vector diagrams, OC and SC tests, Sumpner’s back-to-back test, efficiency. Voltage regulation, effect of frequency, parallel operation, autotransformers, switching currents in transformers, separation of losses. Unit-5 POLYPHASE TRANSFORMERS: Single unit or bank of single-phase units, polyphase connections, Open delta and V connections, Phase conversion: 3 to 6 phase and 3 to 2 phase conversions, Effect of 3-phase winding connections on harmonics, 3-phase winding

transformers, tertiary winding. Reference/Suggested Books 1. A.E. Fitggerald, C.Kingsley Jr and Umans,”Electric Machinery” 6th Edition McGraw Hill, International Student Edition. 2. Kothari & Nagrath: Electric Machines 3/e,TMH 3. M.G. Say, “The Performance and Design of AC machines”, Pit man & Sons. 4. Guru: ELECTRIC MACHINERY 3E, Oxford 5. P. S. Bimbhra-Electrical Machinery, Khanna Pub. 6. Stephen J Chapman: Electric Machinery Fundamentals, McGraw-Hill 7.Husain Ashfaq ,” Electrical Machines”, Dhanpat Rai & Sons. 8.Bhag S. Guru and Huseyin R. Hizirogulu, “Electric Machinery and Transformers” Oxford Uiversity Press, 2001. 4EX2 DIGITAL ELECTRONICS Unit-1 NUMBER SYSTEMS, BASIC LOGIC GATES & BOOLEAN ALGEBRA: Binary Arithmetic & Radix representation of different numbers. Sign & magnitude representation, complement notation, various codes & arithmetic in different codes & their inter conversion. Features of logic algebra, postulates of Boolean algebra. Theorems of Boolean algebra. Boolean function. Derived logic gates: Exclusive-OR, NAND, NOR gates, their block diagrams and truth tables. Logic diagrams from Boolean expressions and vica-versa. Converting logic diagrams to universal logic. Positive, negative and mixed logic. Logic gate conversion. Unit-2 DIGITAL LOGIC GATE CHARACTERISTICS: TTL logic gate characteristics. Theory & operation of TTL NAND gate circuitry. Open collector TTL. Three state output logic. TTL subfamilies. MOS & CMOS logic families. Realization of logic gates in RTL, DTL, ECL, CMOS & MOSFET. Interfacing logic families to one another. Unit-3 MINIMIZATION TECHNIQUES: Minterm, Maxterm, Karnaugh Map, K map upto 4 variables. Simplification of logic functions with K-map, conversion of truth tables in POS and SOP form. Incomplete specified functions. Variable mapping. Quinn-Mc Klusky minimization techniques. Unit-4 COMBINATIONAL SYSTEMS: Combinational logic circuit design, half and full adder, subtractor. Binary serial and parallel adders. BCD adder. Binary multiplier. Decoder: Binary to Gray decoder, BCD to decimal, BCD to 7-segment decoder. Multiplexer, demultiplexer, encoder. Octal to binary, BCD to excess-3 encoder. Diode switching matrix. Design of logic circuits by multiplexers, encoders, decoders and demultiplexers. Unit-5 SEQUENTIAL SYSTEMS: Latches, flip-flops, R-S, D, J-K, Master Slave flip flops. Conversions of flip-flops. Counters: Asynchronous (ripple), synchronous and synchronous decade counter, Modulus counter, skipping state counter, counter design. Ring counter. Counter applications. Registers: buffer register, shift register. Reference/Suggested Books 1. T.M. Floyd, R.P. Jain-Digital fundamentals, Pearson Education. 2. Morris and Mano - Digital logic and Computer Design, Prentice – Hall of India 3. R.P. JAIN:Modern Digital Electronics 4/e, TMH. 4. Kharate G K : Digital Electronics, Oxford 5. Pedroni -Digital Electronics & Design , ELSEVIER. 6. Balbir Kumar and Shail B.Jain, “Electronic Devices and Circuits” PHI, 2007. 7. Anil K. Maini, “Digital Electronics: Principles and Integrated circuits” Wiley 2008. 8. Anand Kumar, “Switching Theory and Logic Design” Prentice Hall of India, 2008.

4EX3 ELECTRICAL ENGINEERING MATERIALS Unit-1 DIELECTRIC MATERIALS: Polarization phenomenon, spontaneous polarization, dielectric constant and loss, piezo and Ferro electricity application. Unit-2 MAGNETIC MATERIALS: Dia, Para, ferro- ferrimagnetisms; soft and hard magnetic materials and their applications. Unit-3 SEMI CONDUCTOR MATERIALS: Crystal growth, zone refining, Degenerate and no degenerate semiconductors, Direct and indirect band gap semiconductors. Electronic properties of silicon, Germanium, Compound Semiconductor, Gallium Arsenide, gallium phosphide & Silicon carbide. Unit-4 CONDUCTIVE & SUPERCONDUCTIVE MATERIALS: Electrical properties of conductive and resistive materials. Important characteristics and electronic applications of specific conductor & resistance materials. Superconductor phenomenon, Type I and Type II superconductors and their applications. Unit-5 PASSIVE COMPONENETS & PCB FABRICATION: Brief study of fabrication methods of fixed and variable type of resistors; capacitors, Inductors, solenoid and toroid, air core, iron core and Ferro core conductors. Printed Circuit Boards - Types, Manufacturing of copper clad laminates, PCB Manufacturing process, Manufacturing of single and double sided PCBs. Surface mount devices - advantages & limitations. Reference/Suggested Books 1. S.O. Kasap – Principle of Electrical Engineering materials and devices 3/e, TMH 2. B.D. Indu-Electrical Engineering Materials, Jain Brothers. 3. Robert M Rose - Structures and Properties of Materials Volume IV, Electronic Properties, Wiley 4. S.P. Seth and P.V. Gupta – A Course of Electrical Engineering Materials, Dhanpat Rai & Sons. 5. C.S. Indulkar & S.Thiruvengadam, An Introduction to Electrical Engineering Materials, S.Chand 6. A.J. Dekker,”Electrical Engineering Materials” Prentice Hall of India 7. C.S. Indulkar & S.Triruvagdan “An Introduction to Electrical Engg. Materials, S.Chand & Co. 8. Solymar, “Electrical Properties of Materials” Oxford University Press. 9. T. K. Basak, “Electrical Engineering Materials” New age International. 4EX4 APPLIED ELECTRONICS Unit-1 FEEDBACK AMPLIFIERS: Classification, Feedback concept, Transfer gain with feedback, General characteristics of negative feedback amplifiers. Analysis of voltage-series, voltageshunt, current-series and current-shunt feedback amplifier, Stability criterion. Unit-2 OSCILLATORS: Classification, Criterion for oscillation. Tuned collector, Hartley, Colpitts, RC-Phase shift, Wien bridge and crystal oscillators, Astable, monostable and bistable multivibrators. Schmitt trigger. Blocking oscillators. Unit-3 HIGH FREQUENCY AMPLIFIERS: Hybrid pie model, conductances and capacitances of hybrid-pie model, high frequency analysis of CE amplifier, gain-bandwidth product. Emitter follower at high frequencies. Unit-4 DIGITAL LOGIC GATE CHARACTERISTICS: TTL logic gate characteristics. Theory & operation of TTL NAND gate circuitry, Open collector TTL. Three state output logic. TTL subfamilies, MOS & CMOS logic families. Realization of logic gates in RTL, DTL, ECL, CMOS & COMS logic families. Realization of logic gates in RTI, DTI, ECL, CMOSFET. Interfacing logic families to one another.

Unit-5 POWER AMPLIFIERS: Power amplifier circuits, Class A output stages, class B output stage and class AB output stages class C amplifiers, pushpull amplifiers with and without transformers. Complementary symmetry & quasi complementary symmetry amplifiers Reference/Suggested Books 1. J. Millman & C. Halkias–Integrated Electronics: Analog & Digital Circuits Systems, TMH 2. Jacob Millman and Arvin Grabel– Microelectronics, Mcgrahill 3. Robert L. Boylested & Louis Nashelshky– Electronic Devices and Circuit theory, PHI 4. David A. Bell – Electronic Devices and Circuits, 5th Ed, Oxford. 5. L.J. Nagrath – Electronics: Analog & Digital, PHI 6. Allen Mottershed – Electronic Devices and Circuits, PHI. 7. SEDRA: MICROELECTRONIC CIRCUITS, 5E (Intl. Version) 4EX5 LINEAR INTEGRATED CIRCUITS Unit-1 OPERATIONAL AMPLIFIERS: Basic differential amplifier analysis, Single ended and double ended configurations, Op-amp configurations with feedback, Op-amp parameters, Inverting and Non-Inverting configuration, Comparators, Adder. Unit-2 OPERATIONAL AMPLIFIER APPLICATIONS: Integrator, Differentiator, Voltage to frequency & Frequency to voltage converters. Oscillators: Phase shift, Wien bridge, Quadrature, square wave, triangular wave, saw tooth oscillators. Voltage controlled oscillators. Unit-3 ACTIVE FILTERS: Low pass, high pass, band pass and band reject filters, All pass filter, Switched capacitor filter, Butterworth filter design, Chebyshev Filter design. Unit-4 PHASE-LOCKED LOOPS: Operating Principles of PLL, Linear Model of PLL, Lock range, Capture range, Applications of PLL as FM detector, FSK demodulator, AM detector, Frequency translator, phase shifter, tracking filter, signal synchronizer and frequency synthesizer, Building blocks of PLL, LM565 PLL. Unit-5 LINEAR IC’s: Four quadrant multiplier & its applications, Basic blocks of linear IC voltage regulators, Three terminal voltage regulators, Positive and negative voltage regulators. The 555 timer as astable and monostable multivibrators. Zero crossing detector, Schmitt trigger.

Reference/Suggested Books 1. R.A. Gayakwad - Op-amplifiers & Linear ICs, Pearson Education. 2. J.M. Jacob – Applications & Design with Analog Integrated Circuits, Prentice Hall of India. 3. RAMAKALYAN: LINEAR CIRCUITS (Includes CD), Oxford 4. K.R. Botkar – Integrated Circuits, Khanna Publications. 5. Salivahanan: Linear Integrated Circuits (TMH) 6. S.M. Sze – VLSI Technology, Tata Mc-Graw Hill. 7. D. Nagchoudhary – principles of Microelectronic Technology, Wheeler Publishing. 8. Stephen A Campbell – The Science and Engineering of Microelectronic Fabrication, Oxford 9. Hong Xiao – Introduction to Semiconductor Manufacturing, Prentice Hall India. 10. Kang – CMOS circuit design, Tata Mc-Graw Hill. 11. Razavi – Design of CMOS Analog Integrated Circuit. (TMH) 4EX6.1 ELECTROMAGNETIC FIELD THEORY Unit-1 INTRODUCTION: Vector Relation in rectangular, cylindrical, spherical and general

curvilinear coordinates system. Concept and physical interpretation of gradient, Divergence and curl, Green’s & Stoke’s theorems. Unit-2 ELECTROSTATICS: Electric field intensity & flux density. Electric field due to various charge configurations. The potential functions and displacement vector. Gauss’s law. Poisson’s and Laplace’s equation and their solution. Uniqueness theorem. Continuity equation. Capacitance and electrostatics energy. Field determination by method of images. Boundary conditions. Field mapping and concept of field cells. Unit-3 MAGNETOSTATICS : Magnetic field intensity, flux density & magnetization, Faraday’s Law, Bio-Savart’s law, Ampere’s law, Magnetic scalar and vector potential, self & mutual inductance, Energy stored in magnetic field, Boundary conditions, Analogy between electric and magnetic field, Field mapping and concept of field cells. Unit-4 TIME VARYING FIELDS: Displacement currents and equation of continuity. Maxwell’s equations, Uniform plane wave in free space, dielectrics and conductors, skin effect sinusoidal time variations, reflection & refraction of Uniform Plane Wave, standing wave ratio. Pointing vector and power considerations. Unit-5 RADIATION, EMI AND EMC: Retarded Potentials and concepts of radiation, Radiation from a small current element. Radiation resistance: Introduction to Electromagnetic Interference and Electromagnetic compatibility, EMI coupling modes, Methods of eliminating interference, shielding, grounding, conducted EMI, EMI testing: emission testing, susceptibility testing. Reference/Suggested Books 1. HAYT-Engineering Electromagnetics 7/e, (With CD), TMH 2. SADIKU:PRINCIPLES OF ELECTROMAGNETICS 4E (Intl. Version) Oxford 3. David K Cheng – Field and Wave Electromagnetic. 2nd Ed., Wesley Publishing Company. 4. Griffith – Introduction to Electrodynamics. 2nd Ed., Prentice Hall of India. 5. J D Kraus, Electromagnetic. 5th edition, (TMH). 6. V.V. Sarwate – Electromagnetic Field and Waves, Willey Eastern Ltd. 7. Bhag Guru, Electromagnetic Field Theory Fundamentals, Cambridge Uni. Press. 8. Kraus, F. “Electromagnetic” Tata Mc. Graw Hill 5th Edition 4EX7 ELECTRICAL MACHINES LAB-I 1 Speed control of D.C. shunt motor by (a) Field current control method & plot the curve for speed vs field current. (b) Armature voltage control method & plot the curve for speed vs armature voltage. 2 Speed control of a D.C. Motor by Ward Leonard method and to plot the curve for speed vs applied armature voltage. 3 To determine the efficiency of D.C. Shunt motor by loss summation (Swinburne’s) method. 4 To determine the efficiency of two identical D.C. Machine by Hopkinson’s regenerative test. 5 To perform O.C. and S.C. test on a 1-phase transformer and to determine the parameters of its equivalent circuit its voltage regulation and efficiency. 6 To perform back-to-back test on two identical 1-phase transformers and find their efficiency & parameters of the equivalent circuit. 7 To perform parallel operation of two 1-phase transformers and determine their load sharing. 8 To determine the efficiency and voltage regulation of a single-phase transformer by direct loading. 9 To perform OC & SC test on a 3-phase transformer & find its efficiency and parameters of its equivalent circuit. 10 To perform parallel operation of two 3-phase transformers and determine their load sharing.

11 To study the performance of 3-phase transformer for its various connections, i.e. star/star star/delta delta/star and delta/delta and find the magnitude of 3rd harmonic current. 4EX8 DIGITAL ELECTORNICS LAB 1

To study and perform the following experiments. (a) Operation of digital multiplexer and demultiplexer. (b) Binary to decimal encoder. (c) Characteristics of CMOS integrated circuits. 2 To study and perform experiment- Compound logic functions and various combinational circuits based on AND/NAND and OR/NOR Logic blocks. 3 To study and perform experiment -Digital to analog and analog to digital converters. 4 To study and perform experiment- Various types of counters and shift registers. 5 To study and perform experiment - Interfacing of CMOS to TTL and TTL to CMOS ICs. 6 To study and perform experiment- BCD to binary conversion on digital IC trainer. 7 To study and perform experiment (a) Astable (b) Monostable (c) Bistable Multivibrators and the frequency variation with different parameters, observe voltage waveforms at different points of transistor. 8 To study and perform experiment -Voltage comparator circuit using IC-710. 9 To study and perform experiment- Schmitt transistor binary circuit.

10 Design 2 bit binary up/down binary counter on bread board. 4EX9 APPLIED ELECTRONICS LAB 1 Plot gain-frequency characteristics of BJT amplifier with and without negative feedback in the emitter circuit and determine bandwidths, gain bandwidth products and gains at 1kHz with and without negative feedback. 2 Study of series and shunt voltage regulators and measurement of line and load regulation and ripple factor. 3 Plot and study the characteristics of small signal amplifier using FET. 4 Study of push pull amplifier. Measure variation of output power & distortion with load. 5 Study Wein bridge oscillator and observe the effect of variation in R & C on oscillator frequency. 6 Study transistor phase shift oscillator and observe the effect of variation in R & C on oscillator frequency and compare with theoretical value. 7 Study the following oscillators and observe the effect of variation of C on oscillator frequency: (a) Hartley (b) Colpitts. 8 Design Fabrication and Testing of k-derived filters (LP/HP). 9 Study of a Digital Storage CRO and store a transient on it. 10 To plot the characteristics of UJT and UJT as relaxation. 11 To plot the characteristics of MOSFET and CMOS. 4EX10 INTEGRATED CIRCUITS LAB


Op-Amp characteristics and get data for input bias current measure the output-offset voltage and reduce it to zero and calculate slew rate. 2 Op-Amp in inverting and non-inverting modes. 3 Op-Amp as scalar, summer and voltage follower. 4 Op-Amp as differentiator and integrator.

5 Design LPF and HPF using Op-Amp 741 6 Design Band Pass and Band reject Active filters using Op-Amp 741. 7 Design Oscillators using Op-Amp (i) RC phase shift (ii) Hartley (iii) Colpitts 8 Design (i) Astable (ii) Monostable multivibrators using IC-555 timer 9 Design Triangular & square wave generator using 555 timer. 10 Design Amplifier (for given gain) using Bipolar Junction Transistor. B. TECH. ELECTRICAL & ELECTRONICS ENGINEERING V-SEMESTER 5EX1 POWER ELECTRONICS Unit-1 Power Semiconductor Devices: Characteristics of Power Transistor, Thyristor, GTO, Power MOSFET and IGBT. Two-Transistor Model of Thyristor. Unit-2 SCR: Construction and characteristics, specification and ratings, pulse transformer, optical isolators, methods of turn on: R, RC, UJT relaxation oscillator, Rating extension by series and parallel connections, string efficiency. Protection of SCRProtection against over voltage, over current, dv/dt, di/dt, Gate protection. Unit-3 Converters-I: Single Phase half & full wave converters with RL load, Single phase dual converters, Three phase half wave converters, Three phase full converters with RL load, Three phase dual converters. Unit-4 Converters-II: Single and three-phase semi converters with RL load. Power Factor Improvement-Extinction angle control, symmetrical angle control, pulse width modulation control and sinusoidal pulse width modulation control. Inversion operation. Effect of load and source impedances. Unit-5 DC-DC Converters: Choppers: Step Up/Down Copper, Chopper Configurations, analysis of type A Chopper Commutation of Choppers. Switched Mode Regulators-buck, boost, buckboost and cuk regulator. Reference/Suggested Books 1. M H Rashid: Power Electronics, Circuits Devices and Applications, PHI 2. Ned Mohan: Power Electronics, John Wiley 3. M D Singh and K B Khanchandani: Power Electronics 2/e, TMH, 2008. 4. Krein P. T: Eleements of Power Electronics, Oxford. 5. P C Sen: Power Electronics, Tata McGraw-Hill, India. 6. C W Lander: Power Electronics, McGraw Hill 7. W Shepherd: Power Electronics and Motor Control, Cambridge Uni. Press. 8. P S Bimbhra: Power Electronics, Khanna Publishers. 5EX2 ELECTRICAL MACHINES-II Unit-1 Introduction: General equation of inducted emf, AC armature windings: concentric and distributed winding, chording, skewing, effect on induced emf. Armature and field mmf, effect of power factor and current on armature mmf, harmonics. Rotating fields. Unit-2 Induction Motors: Construction of squirrel cage & slip ring induction motor, basic principles, flux and mmf waves, induction motor as a transformer. Equivalent circuits, torque

equation, torque-slip curves, no load & block rotor tests, circle diagram, performance calculation. Effect of rotor resistance. Cogging, Crawling. Double cage squirrel cage induction motor, induction generator, induction regulator. Unit-3 Starting & Speed Control of Induction Motors: Various methods of starting & speed control of squirrel cage & slip ring motor, cascade connection, braking. Single-Phase Induction Motor: Revolving field theory, starting methods, equivalent circuits. Unit-4 Synchronous Generator: Construction, types, excitation systems, principles. Equation of induced emf, flux and emf waves, theory of cylindrical rotor and salient pole machines, tworeactance theory, phasor diagrams, power developed, voltage regulation, OC & SC tests, zero power factor characteristics, potier triangle and ASA method of finding voltage regulation, synchronization, parallel operation, hunting and its prevention. Unit-5 Synchronous Motors: types, construction, principle, phasor diagrams, speed torque characteristics, power factor control, V-curves, starting methods, performance calculations, applications, synchronous condenser, synchronous induction motor. Reference/Suggested Books 1. A.E. Fitggerald, C.Kingsley Jr and Umans,”Electric Machinery” 6th Edition McGraw Hill, International Student Edition. 2. Kothari & Nagrath: Electric Machines 3/e,TMH 3. M.G. Say, “The Performance and Design of AC machines”, Pit man & Sons. 4. Guru: ELECTRIC MACHINERY 3E, Oxford 5. P.S. Bimbhra-Electrical Machinery, Khanna Pub. 6. Stephen J Chapman: Electric Machinery Fundamentals, McGraw-Hill 7. Husain Ashfaq ,” Electrical Machines”, Dhanpat Rai & Sons. 8. Irving L.Kosow, “Electric Machine and Tranformers”, Prentice Hall of India. 5EX3 CONTROL SYSTEMS Unit-1 Introduction: Elements of control systems, concept of open loop and closed loop systems., Examples and application of open loop and closed loop systems, brief idea of multivariable control systems. Unit-2 Mathematical Modeling of Physical Systems: Representation of physical system (Electro Mechanical) by differential equations, Determination of transfer function by block diagram reduction techniques and signal flow method, Laplace transformation function, inverse Laplace transformation. Unit-3 Time Response Analysis of First Order and Second Order System: Characteristic equations, response to step, ramp and parabolic inputs, transient response analysis, steady state errors and error constants, Transient & steady state analysis of LTI systems. Unit-4 Stability of the System: Absolute stability and relative stability, Routh’s stability criterion, root locus method of analysis, polar plots, Nyquist stability criterion. M and N Loci, Nichols chart. Unit-5 Elementary Ideas of Compensation, Networks: Lag, lead and log lead networks, brief idea of proportional, derivative and integral controllers. Reference/Suggested Books 1. I J Nagrath and M Gopal: Control Systems Engineering, 3rd Ed, New Age Publication. 2. Robert H Bishop : Modern Control Systems, Boyd and Fraser pub

3. 4. 5. 6.

B C Kuo: Modern Control Engineering, NEW AGE K.Ogata,“Modern Control Engineering” Prentice Hall of India. Norman S.Nise, “Control System Engineering”, John Wiley & Sons. Richard C Dorf, Robert H Bishop : Modern Control Systems, Prentice-Hall 5EX4 ANALOG COMMUNICATION UNIT 1: NOISE EFFECTS IN COMMUNICATION SYSTEMS: Resistor noise, Networks with reactive elements, Noise temperature, Noise bandwidth, effective input noise temperature, Noise figure. Noise figure & equivalent noise temperature in cascaded circuits. UNIT 2 : AMPLITUDE MODULATION : Frequency translation, Recovery of base band signal, Spectrum & power relations in AM systems. Methods of generation & demodulation of AM-DSB, AM-DSB/SC and AM-SSB signals. Modulation & detector circuits for AM systems. AM transmitters & receivers. UNIT 3: FREQUENCY MODULATION : Phase & freq. modulation & their relationship, Spectrum & band width of a sinusoidally modulated FM signal, phasor diagram, Narrow band & wide band FM. Generation & demodulation of FM signals. FM transmitters & receivers.. Comparison of AM, FM & PM. Pre emphasis & deemphasis. Threshold in FM, PLL demodulator. UNIT 4: NOISE IN AM AND FM: Calculation of signal-to-noise ratio in SSB-SC, DSBSC, DSB with carrier, Noise calculation of square law demodulator & envelope detector. Calculation of S/N ratio in FM demodulators, Super heterodyne receivers. UNIT 5: PULSE ANALOG MODULATION : Practical aspects of sampling: Natural and flat top sampling. PAM, PWM, PPM modulation and demodulation methods, PAM-TDM.

Reference/Suggested Books 1. H. Taub & D.L. Schilling-"Principles of Communication Systems 3/e", Tata Mc-Graw Hill. 2. G. Kennedy-"Electronic Communication Systems" 4/e, Tata Mc-Graw Hill. 3. BP LATHI: Modern Digital Analog Communication Systems, Oxford University Press 4. Simon Haykin-"Communication Systems", John Wiley & Sons. 5. B.P. Lathi : Communication Systems”, John Wiley 6. Louch: Digital & Analog Communication, Pearson Education. 7. Tomasi – Electronic Communication, Pearson Education 5EX5 TRANSMISSION & DISTRIBUTION OF ELECTRICAL POWER Unit-1 (i) Supply systems: - Basic network of power system. Transmission and distribution voltage, effect of system voltage on size of conductor and losses. Comparison of DC 2- wire, DC 3- wire, 1- phase AC and 3- phase AC (3- wire and 4- wire) systems. (ii) Distribution Systems: Primary and secondary distribution systems, feeder, distributor and service mains. Radial and ring- main distribution systems. Kelvin’s law for conductor size. Unit-2 Mechanical features of overhead lines:- Conductor material and types of conductor. Conductor arrangements and spacing. Calculation of sag and tension, supports at differentlevels, effect of wind and ice loading, stringing chart and sag template. Conductor vibrations and vibration dampers. Unit-3 Parameters of Transmission Lines: Resistance inductance and capacitance of overhead lines, effect of earth, line transposition. Geometric mean radius and distance. Inductance and capacitance of line with symmetrical and unsymmetrical spacing Inductance and capacitance of double circuit lines. Skin and proximity effects. Equivalent circuits and performance of short and medium transmission lines. Unit-4 (i)Generalized ABCD line constants, equivalent circuit and performance of long

transmission line. Ferranti effect. Interference with communication circuits. Power flow through a transmission line (ii) Corona: Electric stress between parallel conductors. Disruptive critical voltage and visual critical voltage, Factors affecting corona. Corona power loss. Effects of corona. Unit-5 (i) Insulators: Pin, shackle, suspension, post and strain insulators. Voltage distribution across an insulator string, grading and methods of improving string efficiency. (ii) Underground Cables: Conductor, insulator, sheathing and armoring materials. Types of cables. Insulator resistance and capacitance calculation. Electrostatic stresses and reduction of maximum stresses. Causes of breakdown. Thermal rating of cable. Introduction to oil filled and gas filled cables. Reference/Suggested Books 1. A S Pabla: Electric Power Distribution. (TMH) 2. B R Gupta: Power System Analysis & Design. 3. Soni, Gupta and Bhatnagar: A Course in Electrical Power. 4. C.L. Wadhwa: Electrical Power Systems. 5. Nagrath Kothari: Modern Power System Analysis.(TMH) 6. J. J. Grainger& W. D. Stevenson: Power System Analysis. (TMH) 7. Kamaraju: Electric Power Distribution Systems (TMH) 5EX6.1 BIOMEDICAL INSTRUMENTATION UNIT 1: HUMAN BODY SUBSYSTEMS: Brief description of neural, muscular, cardiovascular and respiratory systems; their electrical, mechanical and chemical activities. TRANSDUCERS AND ELECTRODES: Principles and classification of transducers for Biomedical applications, Electrode theory, different types of electrodes, Selection criteria for transducers and electrodes. UNIT 2: BIOPOTENTIALS: Electrical activity of excitable cells, ENG, EMG, ECG, ERG, EEG. Neuron potential. CARDIOVASCULAR SYSTEM MEASUREMENTS: Measurement of blood pressure, blood flow, cardiac output, cardiac rate, heart sounds, Electrocardiograph, phonocardiograph, Plethysmograph, Echocardiograph. UNIT 3: INSTRUMENTATION FOR CLINICAL LABORATORY: Measurement of pH valve of blood, ESR measurement, hemoglobin measurement, O2 and CO2 concentration in blood, GSR measurement. Instrumentation for clinical laboratory: Spectrophotometry, chromatography, Hematology, Measurement of pH value, concentration in blood. MEDICAL IMAGING: Diagnostic X-rays, CAT, MRI, thermography, Ultrasonography, medical use of isotopes, endoscopy. UNIT 4: PATIENT CARE, MONITORING AND SAFETY MEASURES: Elements of Intensive care monitoring basic hospital systems and components, physiological effect of electric current shock hazards from electrical equipment, safety measures, Standards & practices. COMPUTER APPLICATIONS AND BIOTELEMETRY: Real time computer applications, data acquisition and processing, remote data recording and management. UNIT 5: THERAPEUTIC AND PROSTHETIC DEVICES: Introduction to cardiac pacemakers, defibrillators, ventilators, muscle stimulators, diathermy, heart lung machine, Hemodialysis, Applications of Laser. Reference/Suggested Books 1. Webster, J.G. – Medical Instrumentation, Application and Design, John Wiley and Sons. 2. Jacobson, B. Webster, J.G. – Medical and Clinical Engineering, PHI, International. 3. Cromwell – Biomedical Instrumentation and Measurments, et a1, PHI, International 4. R.S. Khandpur – Handbook of Biomedical Instrumentation, Tata McGraw Hill.

5. Carr – Introduction to Biomedical Equipments, Pearson Education. 6. T. Cromwell, F.J. Weibell & F.A.Pfieffer, “Biomedical Instrumentation & Measurements” Prentice Hall International 7. H.E. Thomas, “Handbook of Biomedical Instrumentation and Measurement” Restone Publishing Company 5EX6.2 OOPS PROGRAMMING USING JAVA Unit I JAVA: Variation from C++ to JAVA. Introduction to Java byte code, virtual machine, Program Elements: Primitive data types, variables, assignment, arithmetic, short circuit logical operators, Arithmetic operators, bit wise operators, relational operators, boolean logic operators, the assignment operators, operator precedence. Decision and control statements, arrays. Unit II Objects and classes: Objects, constructors, returning and passing objects as parameter. Nested and inner classes. Single and Multilevel Inheritance, Extended classes, Access Control, usage of super. Overloading and overriding methods. Abstract classes. Using final with inheritance. Unit III Package and Interfaces: Defining package, concept of CLASSPATH, access protection, importing package. Defining and implementing interfaces. String Handling: String constructors, special string operations, character extraction, searching and comparing strings, string Buffer class. Unit IV Exception Handling: Exception handling fundamentals, Exception types, uncaught exceptions, try, catch and multiple catch statements. Usage of throw, throws and finally. Unit V Applet: Applet Fundamentals, using paint method and drawing polygons, file management (Input/Output) in JAVA. Reference/Suggested Books 1. Balagurusamy: Programming with Java 4/e (TMH) 2. Grady Booch – Object Oriented Analysis & Design with Applications (Pearson Education, Patrick 3. Herbert Schildt – Java 2 :The complete Reference (McGraw-Hill, 3rd Ed.) 4. James Rambaugh - Object Oriented Modelling and Design (PHI, IGNOU Ed.) & Pearson. 5. Yashwant Kanithkar: Unix & Shell Programming (BPB). 6. Sumitabha Das: Unix: Concepts & Applications 4/e (TMH). 5EX6.3 INTRODUCTION TO VLSI Unit-1 Introduction to MOS Technology: Basic MOS transistors, Enhancement Mode transistor action, Depletion Mode transistor action, NMOS and CMOS fabrication. Unit-2 Basic Electrical Properties of MOS Circuits: Ids versus Vds relationship, Aspects of threshold voltage, Transistor Transconductance gm. The nMOS inverter, Pull up to Pull-down ratio for a NMOS Inverter and CMOS Inverter (Bn/Bp), MOS transistor circuit Model, Noise Margin.

Unit-3 CMOS Logic Circuits: The inverter, Combinational Logic, NAND Gate NOR gate, Compound Gates, 2 input CMOS Multiplexer, Memory latches and registers, Transmission Gate, Gate delays, CMOS-Gate Transistor sizing, Power dissipation. Unit-4 Basic Physical Design of Simple Gates and Layout Issues: Layout issues for inverter, Layout for NAND and NOR Gates, Complex Logic gates Layout, Layout optimization for performance. Unit-5 Introduction to VHDL, Verilog & other design tools. VHDL Code for simple Logic gates, flipflops, shift-registers, Counters, Multiplexers, adders and subtractors. Reference/Suggested Books 1. S M Sze: VLSI Technology (TMH) 2. SM KANG:CMOS Digital Integrated Circuits, TMH 3. Stephen A Compbell: The Science & Engineering of Microelectronic Fabrication, Oxford. 4. James D Plummer, Micheal Deal & Petter B Griffin: Silicon VLSI Tech. Fundamental, Practice & Modeling, Prentice Hall. . 5EX7 POWER ELECTRONICS LAB 1 Study the comparison of following power electronics devices regarding ratings, performance characteristics and applications: Power Diode, Power Transistor, Thyristor, Diac, Triac, GTO, MOSFET, MCT and SIT. 2 Determine V-I characteristics of SCR and measure forward breakdown voltage, latching and holding currents. 3 Find V-I characteristics of TRIAC and DIAC. 4 Find output characteristics of MOSFET and IGBT. 5 Find transfer characteristics of MOSFET and IGBT. 6 Find UJT static emitter characteristics and study the variation in peak point and valley point. 7 Study and test firing circuits for SCR-R, RC and UJT firing circuits. 8 Study and test 3-phase diode bridge rectifier with R and RL loads. Study the effect of filters. 9 Study and obtain waveforms of single-phase half wave controlled rectifier with and without filters. Study the variation of output voltage with respect to firing angle. 10 Study and obtain waveforms of single-phase half controlled bridge rectifier with R and RL loads. Study and show the effect of freewheeling diode. 11 Study and obtain waveforms of single-phase full controlled bridge converter with R and RL loads. Study and show rectification and inversion operations with and without freewheeling diode. 12 Control the speed of a dc motor using single-phase half controlled bridge rectifier and full controlled bridge rectifier. Plot armature voltage versus speed characteristics. Reference/Suggested Books 1. P Arora: Power Electronics Laboratory-Experiments and Organization, Narosa Pub. 2. P B Zbar: Industrial Electronics- A Text-Lab Manual, Tata McGraw Hill 5EX8ELECTERICAL MACHINES LAB-II 1 Separation of transformer core losses and to determine the hystersis and eddy current losses at rated voltage and frequency. 2 To plot the O.C.C. & S.C.C. of an alternator and to determine its regulation by synchronous impedance method. 3 To synchronize an alternator across the infinite bus (RSEB) & summarize the effects of variation of excitation on load sharing. 4 To plot the V-curve for a synchronous motor for different values of loads. 5 To perform sumpner’s back-to-back test on 3 phase transformers, find its efficiency &

parameters for its equivalent circuits. 6 To perform the heat run test on a delta/delta connected 3-phase transformer and determine the parameters for its equivalent circuit. 7 To perform no load and blocked rotor test on a 3 phase induction motor and to determine the parameters of its equivalent circuits. Draw the circle diagram and compute the following (i) Max. Torque (ii) Current (iii) slip (iv) p.f. (v) Efficiency. 8 To perform the load test on a 3-phase induction motor and determine its performance characteristics (a) Speed vs load curve (b) p.f. vs load curve (c) Efficiency vs load curve (d) Speed vs torque curve 9 Determination of losses and efficiency of an alternator. 10 To find Xd and Xq of a salient pole synchronous machine by slip test. Reference/Suggested Books 1. D.R. Kohli & S.K. Jain – A Laboratory Course in Electrical Machines, Publisher: NEM CHAND & BROTHERS. 2. S.G. Tarnekar & P.K. Kharbanda – Laboratory Course in Electrical Engineering , S. Chand 5EX9 CONTROL SYSTEM LAB 1 Introduction to MATLAB Computing Control Software. 2 Defining Systems in TF, ZPK form. 3 (a) Plot step response of a given TF and system in state-space. Take different values of damping ratio and wn natural undamped frequency. (b) Plot ramp response. 4 For a given 2nd order system plot step response and obtain time response specification. 5 To design 1st order R-C circuits and observe its response with the following inputs and trace the curve. (a) Step (b) Ramp (c) Impulse 6 To design 2nd order electrical network and study its trarient response for step input and following cases. (a) Under damped system (b) Over damped System. (c) Critically damped system. 7 To Study the frequency response of following compensating Networks, plot the graph and final out corner frequencies. (a) Log Network (b) Lead Network (c) Log-lead Network. 8 To draw characteristics of ac servomotor 9 To perform experiment on Potentiometer error detector. 10 Check for the stability of a given closed loop system. 11 Plot bode plot for a 2nd order system and find GM and PM. 5EX10 POWER SYSTEM DESIGN LAB 1 2 3

Generating station design: Design considerations and basic schemes of hydro, thermal, nuclear and gas power plants. Electrical equipment for power stations, Auxiliary power supply scheme for thermal power plant.


Distribution system Design: Design of feeders & distributors. Calculation of distributors. Calculation of conductor size using Kelvin’s law. Methods of short term, medium term and long term load forecasting.


Sending end and receiving end power circle diagrams.


Instrument Transformers: Design considerations of CTs & PTs for measurement and protection. Substations: Types of substations, various bus-bar arrangements. Electrical equipment for substations.


voltage drops in


Definition of entrepreneur, qualities of a successful entrepreneur, Charms of being an entrepreneur, achievement- motivation, leadership and entrepreneurial competencies.

2 3 4 5 6

Decision-making, procedures and formalities for starting own business, financial support system. Identification and selection of business opportunities and market survey, business plan. Implementation and customer satisfaction. Business crises, problem-solving attitude, communication skill. Government policies for entrepreneurs. Knowledge based enterprises, Scope of entrepreneur in present context, area of future entrepreneurship. Marketing & Sales Promotion, Techno-Economic Feasibility Assessment by Preparation of Preliminary & Detailed project report. B. TECH. ELECTRICAL & ELECTRONICS ENGINEERING VI-SEMESTER 6EX1 MODERN CONTROL THEORY

Unit-1 Introduction: Concept of Linear vector space Linear Independence, Bases & Representation, domain and range. Concept of Linearity, relaxedness, time invariance, causality. Unit-2 State Space Approach of Control System Analysis: Modern Vs conventional control theory, concept of state, state variable state vector, state space, state space equations, Writing statespace equations of mechanical, Electrical systems, Analogous systems. Unit-3 State Space Representation using physical and phase variables, comparison form of system representation. Block diagram representation of state model. Signal flow graph representation. State space representation using canonical variables. Diagonal matrix. Jordan canonical form, Derivation of transfer function from state-model. Unit-4 Solution of State Equations: Diagonalization, Eigenvalues and eigen vectors. Matrix exponential, State transition matrix, Properties of state transition matrix. Computation of State transition matrix concepts of controllability & observability. Pole placement by state feedback, Ackerman’s formula Unit-5 Digital Control Systems: Introduction, sampled data control systems, signal reconstruction, difference equations. The z-transform, Z-Transfer Function. Block diagram analysis of sampled data systems, z and s domain relationship, digital PID controller Reference/Suggested Books 1. I J Nagrath and M Gopal: Control Systems Engineering, 3rd Ed, New Age Publication. 2. Richard C Dorf, Robert H Bishop : Modern Control Systems, Prentice-Hall 3. M. GOPAL:Digital Control and State Variable Methods , TMH 4. B.C.Kuo, “Digital Control System”,Saunders College Publishing. 5. C.H. Houpis and G.B.Lamont, “Digital Control Systems:MGH 6. Donald E. Kiv, “Optimal Control Theory: An Introduction” Prentice Hall 7. D.Roy Choudhary, “Modern Control Engineering”, Prentice Hall of India 8. C T Chen, System Theory & Design, Oxford University Press 6EX2 MICROPROCESSOR AND MICROCONTROLLER UNIT 1: INTRODUCTION: CPU, address bus, data bus and control bus. Input/ Output devices, buffers, encoders, latches and memories.

UNIT 2: 8085 MICROPROCESSOR ARCHITECTURE: Internal data operations and registers, pins and signals, peripheral devices and memory organization, interrupts. CISC and RISC architecture overview. UNIT 3: 8085 MICROPROCESSOR INSTRUCTIONS: Classification, format and timing. Instruction set. Programming and debugging, 8 bit and 16 bit instructions. UNIT 4: 8085 MICROPROCESSOR INTERFACING: 8259, 8257, 8255, 8253, 8155 chips and their applications. A/D conversion, memory, keyboard and display interface (8279). UNIT 5: INTRODUCTION TO 8051 MICROCONTROLLER: General features & architecture of 8051. Memory, timers and interrupts. Pin details. Interfacing and applications. Reference/Suggested Books 1. Gaonkar, Ramesh S, “Microprocessor Architecture, programming and applications with the 8085” Penram International Publishing 5th Ed. 2. Douglas Hall: Microprocessors and Interfacing, Revised Second Edition (SIE) TMH 3. Mathur A P -Introduction to Microprocessors , TMH 4. Ray, A.K. & Burchandi, K.M., “Advanced Microprocessors and Peripherals: Architecture, Programaming and Interfacing” Tata Mc. Graw Hill. 5. Krishna Kant, “Microprocessors and Microcontrollers” PHI Learning. 6. Brey, Barry B. “INTEL Microprocessors” Prentice Hall ( India) 7. M. Rafiquzzaman, “Microprocessors- Theory and applications” PHI 8. B. Ram, “Advanced Microprocessor & Interfacing” Tata McGraw Hill 9. Liu and Gibson G.A., “Microcomputer Systems: The 8086/8088 Family” PHI 6EX3 PROTECTION OF POWER SYSTEM Unit-1 (i) Causes and consequences of dangerous currents: Faults, overloads and switching over currents. Introduction to protection, trip circuit of a circuit breaker. Functional characteristics of a relay, zone of protection, primary and backup protection. (ii) CTs & PTs: Current transformer construction, measurement and protective CTs. Type of potential transformers. Steady state ratio and phase angle errors in CTs and PTs. Transient errors in CT and CVT (Capacitive Voltage Transformer). Unit-2 Overcurrent Protection: HRC fuse and thermal relay. Overcurrent (OC) relays instantaneous, definite time, inverse time and inverse definite minimum time overcurrent relays, time and current gradings. Induction disc type relay. Directional overcurrent relay, 30◦, 60◦ and 90◦ connections. Earth fault relay. Brief description of overcurrent protective schemes for a feeder, parallel feeders and ring mains. Unit-3 Generator Protection: Stator protection - differential and percentage differential protection, protection against stator inter-turn faults, stator overheating protection. Rotor protectionprotection against excitation and prime mover failure, field earth fault and unbalanced stator currents (negative sequence current protection). Unit-4 (i) Transformer Protection: Percentage differential protection, magnetizing inrush current, percentage differential relay with harmonic restraint. Buchholz relay. Differential protection of generator transfer unit. (ii) Busbar Protection: Differential protection of busbars, high impedance relay scheme, frame leakage protection. Unit-5 (i) Transmission Line Protection: Introduction to distance protection. Construction, operating principle and characteristics of an electromagnetic impedance relay. Effect of arc resistance. Induction cup type reactance and mho relays. Comparison between impedance, reactance and mho relays. Three stepped distance protection of transmission line. (ii) Induction Motor Protection: Introduction to various faults and abnormal operating

conditions, unbalance supply voltage and single phasing. Introduction to protection of induction motors- HRC fuse and overcurrent, percentage differential, earth fault and negative sequence voltage relays. Reference/Suggested Books 1. BADRI RAM:Power System Protection and Switchgear , TMH 2. Ravindra Nath M. Chander, Power System Protection and Switch Gear, John Wiley Eastern 3. Sunil S. Rao. Power System Protection and Switch Gear, Khanna Publishers 1989 4. Oza:Power System Protection and Switchgear , TMH 5. T.S. Madhava Rao, Power System Protections (Static Relays), Tata McGrwaw-hill, 1989. 6. A.R. van C Warrington, Protective Relays, Chapman and Hall London, 1968. 7. S.K. Basu and S. Chaudhary, Power System Protection, Raju Primlan Oxford, 1983. 6EX4 ADVANCED POWER ELECTRONICS Unit-1 AC Voltage Controllers: Principle of On-Off Control, Principle of Phase control, Single Phase Bi-directional Controllers with Resistive Loads, Single Phase Controllers with Inductive Loads, Three Phase full wave AC controllers, AC Voltage Controller with PWM Control. Unit-2 Inverters: Principle of Operation, Single-phase bridge inverters, Three phase bridge Inverters: 180 and 120 degree of conduction. Voltage control of Single Phase and Three Phase Inverters, Current Source Inverters, Harmonics and its reduction techniques. Unit-3 Cycloconverters: Basic principle of operation, single phase to single phase, threephase to three-phase and three phase to single phase cycloconverters. Output equation, Control circuit. Unit-4 DC Power Supplies: Switched Mode DC Power Supplies, flyback converter, forward converter, half and full bridge converter, resonant DC power supplies, bidirectional power supplies. Unit-5 AC Power Supplies: Switched mode power supplies, Resonant AC power supplies, bidirectional AC power supplies. Multistage conversions, Control Circuits: Voltage Mode Control, Current Mode Control Reference/Suggested Books 1. M.H. Rashid,“Power Electronics: Circuits, Devices & Applications”, Prentice Hall of India Ltd. 3rd Edition,2004. 2. Bose -Power Electronics & Motor Drives ELSEVIER 3. V.R. Moorthy, “Power Electronics: Devices, Circuits and Industrial Applications” Oxford Press, 2007. 4. V Subrahmanyam: Power Electronics, New Age Inc. Publishers, New Delhi. 5. Chakrabarti & Rai, “Fundamentals of Power Electronics & Drives”Dhanpat Rai & Sons. 6. Ned Mohan, T.M.Undeland and W.P.Robbins, “Power Electronics:Converters, Applications and Design”, Wiley India Ltd,2008. 7. R Krishnan, electric motor drives: modeling, analysis and control, Pearson Edu 8. Randal Shaffer, “Fundamentals of Power Electronics with MATLAB” Firewall Media, 2007. 6EX5 DATA STRUCTURES IN C Unit-1 Performance Measurement: Space complexity and Time complexity, big oh, omega and theta notations and their significance. Linear Lists - Array and linked representation, singly & doubly linked lists. Concept of circular linked lists. Unit-2 Array & Matrices: Row and Column Major mapping & representation, irregular 2D array, Matrix operations, Special matrices: diagonal, tri-diagonal, triangular and

symmetric. Sparse matrices representation and its transpose. Unit-3 Stacks: Representation in array & linked lists, basic operation, Applications of stacks in parenthesis matching, towers of Hanoi etc. Queues - Representation in array & linked lists, applications, circular queues. Unit-4 Trees: Binary Tree, representation in array & linked lists, basic operation on binary trees, binary tree traversal (preorder, post order, in order). Search Trees - Binary search tree, indexed-binary search tree, basic operation, AVL tree, B-tree & Heap Tree. Unit-5 Graphs: Representation of unweighted graphs, BFS, DFS, and Minimum cost spanning trees, Single source shortest path. Sorting - Bubble sort, insertion sort, merge sort, selection sort, quick sort, heap sort. Reference/Suggested Books 1. Havowitz & Sawn: Data structures in Pascal (BPB Publication) 2. Havowitz & Sawhni: Data structures in C & C++ (BPB Publication) 3. Tannenbaum: Data structures in C (PHI) 4. PAI:Data Structures and Algorithms , TMH 5. TREMBLAY: Introduction to Data Structures with Applications , TMH 6EX6.1 NEURAL NETWORKS UNIT 1: INTRODUCTION: Introduction to Neural Networks, Biological basis for NN, Human brain, Models of a Neuron, Directed Graphs, Feedback, Network architectures, Knowledge representation, Artificial intelligence & Neural Networks. UNIT 2: LEARNING PROCESSES: Introduction, Error -Correction learning, Memory -based learning, Hebbian learning, Competitive learning, Boltzmann learning, Learning with a Teacher & without a teacher, learning tasks, Memory, Adaptation. UNIT 3: SINGLE LAYER PERCEPTRONS: Introduction, Least-mean-square algorithm, Learning Curves, Learning rate Annealing Techniques, Perceptron, Perceptron Convergence Theorem. UNIT 4: MULTI LAYER PERCEPTRONS: Introduction, Back-Propagation Algorithm, XOR Problem, Output representation and Decision rule, Feature Detection, Back-Propagation and Differentiation, Hessian Matrix, Generalization. UNIT 5: RADIAL-BASIS FUNCTION NETWORKS & SELF-ORGANISING MAPS: Introduction to Radial basis function networks, Cover’s Theorem on the Separability of Patterns, Interpolation Problem, Generalized Radial-Basis function networks, XOR Problem. Self-Organizing map, Summary of SOM Algorithm, Properties of the feature map. Reference/Suggested Books 1. Timothy J. Ross – Fuzzy Logic with Engineering Applications, Mc-Graw Hill India. 2. Yagya Narayana – Artificial Neural Networks, Prentice Hall India 1999. 3. Elaine Rich and Kevin Knight, Artificial Intelligence, TMH Pub. 4. Satish Kumar: Neural Networks (TMH) 5. James A Anderson, An introduction to Neural Networks. 6. Dan. W Patterson, Artificial Intelligence and Expert Systems. 7. BISHOP: NEURAL NETWORKS FOR PATTERN RECOGNITION, Oxford

6EX6.2 ADVANCED MICROPROCESSORS Unit-1 8086 Microprocessor: Hardware specifications, architecture, address spaces, clock generator, bus controller and arbiter, Minimum and maximum mode, System Bus Timing. Unit-2 Software & Instruction Set: Assembly language programming: addressing mode and instructions of 8086, linking and execution of programs, MACRO programming, assembler directives and operators. Unit-3 I/O Interfaces: Programmable peripheral interfacing (8255, 8155), Programmable Timer interfacing (8253,8254), Programmable interrupt controller (8259) Serial Communication interfaces. Unit-4 Data & Memory Interfacing: A/D, D/A converter interfacing, Memory interfacing and Decoding, DMA controller. Unit-5 Multiprocessor Configurations: 8086 based Multiprocessor systems. 8087 Numeric data processor. Reference/Suggested Books 1. John Freer - System design with Advance Microprocessors, A.H. Wheeler 2. Ray & Bhurchandi: Advanced Microprocessors and Peripherals 2/e (TMH) 3. Gibson - 16-Bit Microprocessor. 4. Brey – 16-Bit Microprocessor 5. Ray, A.K. & Burchandi, K.m., “Advanced Microprocessors and Peripherals: Architeacture, Programming and Interfacing” Tata Mc.Graw Hill. 6. Renu Sing & B.P.Singh, “Advanced Microprocessors and Microcontrollers” New Age Krishna Kant,”Microprocessors and Microcontrollers” PHI Learning. 7. Brey, Barry B. “The INTEL Microprocessors” Pearson Education. 8. Ayala, “The 8051 Micro Controller”, Centage Learning. 9. Mazidi M.A., Maizidi J.G. Mckinlay R.D., “The 8051 Microcontroller and Embedded Systems” Pearson Education.

6EX6.3 DIGITAL COMMUNICATION AND INFORMATION THEORY Unit-1 PCM & DELTA Modulation Systems: PCM and delta modulation, quantization noise in PCM and delta modulation. Signal-to-noise ratio in PCM and delta modulation, T1 Carrier System, Comparison of PCM and DM. Adaptive delta Modulation. Bit, word and frame synchronization, Matched filter detection. Unit-2 Digital Modulation Techniques: Various techniques of phase shift, amplitude shift and frequency shift keying. Minimum shift keying. Modulation & Demodulation. Unit-3 Error Probability in Digital Modulation: Calculation of error probabilities for PSK, ASK, FSK & MSK techniques. Unit-4 Information Theory: Amount of Information, Average Information, Entropy, Information rate, Increase in Average information per bit by coding, Shannon's Theorem and Shannon's bound, Capacity of a Gaussian Channel, BW-S/N trade off, Orthogonal signal transmission. Unit-5 Coding: Coding of Information, Hamming code, Single Parity-Bit Code, Linear Block code, cyclic code & convolutional code Reference/Suggested Books 1. H. Taub & D.L. Schilling-"Principles of Communication Systems", Tata Mc-Graw Hill.

2. 3. 4. 5. 6. 7. 8.

Simon Haykin-"Communication Systems", John Wiley & Sons. Proakis –“Digital Communication”, Mc-Graw Hill. Sklar – “Digital Communication”, Pearson Education. P. Chakrabarti – “Principles of Digital Communications”, Danpatrai & Sons. K. Sam Shanmugam – “Digital and Analog Communication System”, John Wiley Sons. Lathi, B.P. / “Modern Digital &Analog Communication System” /Oxford Press. A.B. Carlson / “Digital Communication Systems”,Tata McGraw-Hill. 6EX7 MICROPROCESOR LAB 1. Study the hardware, functions, memory structure and operation of 8085 microprocessor kit. 2. Program to perform integer division: (i) 8-bit by 8-bit (ii) 16-bit by 8-bit. 3. Transfer of a block of data in memory to another place in memory in the direct and reverse order. 4. Searching a number in an array and finding its parity. 5. Sorting of array in: (i) Ascending (ii) Descending order 6. Programme to perform following conversion: (i) BCD to ASCII (ii) BCD to Hexadecimal 7. Programme to multiply two 8-bit numbers. 8. Programme to generate and sum 15 fibanocci numbers. 9. Programme for rolling display of message “INDIAN”. 10. To insert a number at correct place in a sorted array. 11. Serial and Parallel data transfer on output port 8155 & 8255 & designing of disco light, running light, and sequential lights on off by above hardware. 12. Generation of different waveform on 8253/ 8254 programmable timer. 6EX8 POWER SYSTEM LAB

1 Study the burden effect on the performance of CT and measure ratio error. 2 Find out the sequence components of currents in three 1-Phase transformers and 3Phase transformer and compare their results. 3 (i) Study over current relay. (ii) Draw the current-time characteristic of an over current relay for TMS=1 & 0.5 and PSM=1.25 & 1.0. 4 (i) Study percentage bias differential relay. (ii) Plot the characteristics of a percentage bias differential relay for 20%, 30% and 40% biasing. 5 Study gas actuated Buchholz relay. 6EX9 MATLAB PROGRAMMING LAB 1 Basics of MATLAB matrices and vectors, matrix and array operations, Saving and loading data, plotting simple graphs, scripts and functions, Script files, Function files, Global Variables, Loops, Branches, Control flow, Advanced data objects, Multidimensional matrices, Structures, Applications in linear algebra curve fitting and interpolation. Numerical integration, Ordinary differential equation. (All contents is to be covered with tutorial sheets) 2 Simulink: Idea about simulink, problems based on simulink. (All contents is to be covered with tutorial sheets) 6EX10 ADVANCED POWER ELECTRONICS LAB 1 Study and test AC voltage regulators using triac, antiparallel thyristors and triac & diac. 2 Study and test single phase PWM inverter. 3 Study and test buck, boost and buck- boost regulators. 4

Study and test MOSFET chopper. 5 Study and test Zero voltage switching. 6 Study and test SCR DC circuit breaker. 7 Control speed of a dc motor using a chopper and plot armature voltage versus speed characteristic. 8 Control speed of a single-phase induction motor using single phase AC voltage regulator. 9 (i) Study single-phase dual converter. (ii) Study speed control of dc motor using singlephase dual converter. 10 Study one, two and four quadrant choppers (DC-DC converters). 11 Study speed control of dc motor using one, two and four quadrant choppers. 12 Study single-phase cycloconverter. B. TECH. ELECTRICAL & ELECTRONICS ENGINEERING VII-SEMESTER 7EX1 DATA BASE MANGEMENT SYSTEM Unit-1 Introduction, need, purpose and goals of DBMS. DBMS Architecture, Concept of keys, Generalization and specialization, introduction to relational data model, ER modeling, concept of ER diagram. Unit-2 Database Design: Conceptual Data Base design. Theory of normalization, Primitive and composite data types, concept of physical and logical databases, data abstraction and data independence, relational algebra and relational calculus. Unit-3 SQL, DDL and DML. Constraints assertions, views database security. Application Development using SQL: Host Language interface, embedded SQL programming. GL’s, Forms management and report writers. Stored procedures and triggers. Dynamic SQL, JDBC. Unit-4 Internal of RDBMS: Physical data organization in sequential, indexed, random and hashed files. Inverted and multilist structures. Unit-5 (i) Transaction Management: Transaction concept, transaction state, serializability, conflict erializabiltiy, view serializability. (ii) Concurrency Control: Lock based protocol. (iii) Deadlock Handling: Prevention detection, recovery. (iv) Recovery System: Log based recovery. Reference/Suggested Books 1. Silverschatz Korth and Sudarshan – Database System Concepts, 5th ed., Tata Mc-Graw Hill. 2. Raghu Rama Krishnan – Database Management Systems, 2nd ed., Tata Mc-Graw Hill. 3. Elmasari – Fundamentals of Data Base Systems, Pearson Education. 4. Gordon C. Everest – Database Management Objectives, System Functions and Administration, TMH. 5. Date C.J., “An Introduction To Database System”,Addition Wesley 6. Alex Berson & Stephen J.Smith,“Data Warehousing,Data Mining & OLAP”,TMH. 7. Mallach, “Data Warehousing System”, Mc. Graw Hill 8. Majumdar & Bhattacharya, “Database Management System”, Tata Mc Graw Hill 7EX2 POWER SYSTEM ANALYSIS Unit-1 (i) Percent and per unit quantities. Single line diagram for a balanced 3-phase system. (ii) Admittance Model: Branch and node admittances Equivalent admittance network and calculation of Y bus. Modification of an existing Y bus.

Unit-2 (i) Impendence Model: Bus admittance and impedance matrices. Thevenin’s theorem and Z b Direct determination of Z bus. Modification of an existing bus. (ii) Symmetrical fault Analysi Transient on a Transmission line, short circuit of a synchronous machine on no load, short circu of a loaded synchronous machine. Equivalent circuits of synchronous machine under su transient, transient and steady state conditions. Selection of circuit breakers, Algorithm for sho circuit studies. Analysis of 3 phase faults. Unit-3 (i) Symmetrical Components: Fortescure theorem, symmetrical component transformation. Phase shift in star-delta transformers. Sequence Impedances of transmission lines, Synchronous Machine and Transformers, zero sequence network of transformers and transmission lines. Construction of sequence networks of power system. (ii) Fault Analysis: Analysis of single line to ground faults using symmetrical components, connection of sequence networks under the fault condition. Unit-4 Unsymmetrical Fault Analysis: (i) Analysis of line-to-line and double line to ground faults using symmetrical components, connection of sequence networks under fault conditions. (ii) Analysis of unsymmetrical shunt faults using bus impedance matrix method. Unit-5 Load Flow Analysis: Load flow problem, development of load flow equations, bus classification. Gauss Seidel, Newton Raphosn, decoupled and fast decoupled methods for load flow analysis. Comparison of load flow methods. Reference/Suggested Books 1. J. J. Grainger, William, D. Stevenson Jr. – Power System Analysis. McGraw-Hill 2. Nagrath and Kothari – Power System Engineering 2/e Tata Mc Graw Hill 3. Haadi SAADAT- Power System Analysis (With Disk) ,TMH 4. T.K Nagsarkar & M.S. Sukhija, “Power System Analysis” Oxford University Press,2007. 5. W.D. Stevenson, Jr. “Elements of Power System Analysis”, Mc Graw Hill. 6. J.D. Glover, M.S. Sharma & T.J.Overbye, “Power System Analysis and Design” Thomson, 2008. 7. Kothari & Nagrath, “Modern Power System Analysis” Tata Mc. Graw Hill.

7EX3 ARTIFICIAL INTELLIGENCE TECHNIQUES Unit-1 Artificial Intelligence: Introduction to AI and knowledge based Expert systems: Introduction,Importance and Definition of AI, ES, ES building tools and shells. Unit-2 Knowledge Representation: Concept of knowledge, Representation of knowledge using logics rules, frames. Procedural versus. Declarative knowledge, forward versus backward chaining. Control Strategies: -Concept of heuristic search, search techniques depth first search, Breath first search, Generate & test hill climbing, best first search. Unit-3 Artificial Neural Network: Biological Neurons and synapses, characteristics Artificial Neural Networks, types of activation functions. Perceptions: Perception representation, limitations of perceptrons. Single layer and multiplayer perceptrons. Perceptron learning algorithms. Unit-4 Basic Concepts in Learning ANN: Supervised learning, Back propagation algorithm, unsupervised learning, Kohonen’s top field network & Algorithm. Unit-5 Fuzzy Logic: Fuzzy logic concepts, Fuzzy relation and membership functions, Defuzzufication, Fuzzy controllers Genetic algorithm: concepts, coding, reproduction,

crossover, mutation, scaling and fitness. Reference/Suggested Books 1. Elaine Rich and Kevin Knight, Artificial Intelligence 3/e, TMH 2. PADHY: ARTIFICIAL INTELLIGENCE & INTELLIGENT SYSTEMS, Oxford 3. James A Anderson, An introduction to Neural Networks. 4. Dan. W Patterson, Artificial Intelligence and Expert Systems. 5. Kumar Satish, “Neural Networks” Tata Mc Graw Hill 6. S. Rajsekaran & G.A. Vijayalakshmi Pai, “Neural Networks,Fuzzy Logic and Genetic Algorithm:Synthesis and Applications” Prentice Hall of India. 7. Siman Haykin,”Neural Netowrks”Prentice Hall of India 7EX4 UTILIZATION OF ELECTRICAL POWER Unit-1 (i)Electric Heating: Different methods of electric heating. Principle of high frequency induction and di-electric heating. Construction, operation, performance and applicationsof arc furnace and induction furnace. (ii) Electric Welding: Welding process, welding transformer, Classification of Electric Welding: arc welding, resistance welding, welding of various metals. Unit-2 Illuminations: Definitions, laws of illuminations, polar curves, luminous efficiency, photometer, incandescent lamps: filament materials, halogen lamp. electric discharge lamps: sodium vapour lamp mercury vapour lamp and fluorescent lamp. Light Calculations: commercial, industrial, street and flood lighting. Unit-3 Electrolytic Process: Principles and applications of electrolysis, electrodeposition, manufactures of chemicals, anodizing, electro polishing electro-cleaning, electroextraction, electrorefinig, electro-stripping (parting) power supplies for electrolytic process. Unit-4 Electric Traction & Means of Supplying Power: Systems of Electric Traction: DC & AC Systems, Power Supply for Electric Traction System: Comparison and application of different systems. Sub-station equipment and layout, conductor rail & pantograph. Unit-5 Traction Methods: Types of services, speed time and speed distance curves, estimation of power and energy requirements, Mechanics of train movement. Co-efficient of adhesion, Adhesive weight, effective weight. Traction Motor Controls: DC and AC traction motors, Series parallel starting. Methods of electric braking of traction motors. Reference/Suggested Books 1. H. Partab,“Art and Science of Electrical Energy” Dhanpat Rai & Sons 2. H. Partab, “Modern Electric Traction” Dhanpat Rai & Sons. 3. C.L. Wadhwa – Utilization of Electric Traction Electric Power. 4. G.K.Dubey,“Fundamentals of Electric Drives” Narosa Publishing House. 5. Vedam and Subrahmanyam – Concept & Application of Electric Drives (TMH) 7EX5 POWER SYSTEM ENGINEERING Unit-1 Economic Operation of Power Systems: Introduction, system constraints, optimal operation of power systems. Input output, heat rate and incremental rate curves of thermal generating units. Economic distribution of load between generating units within a plant. Economic distribution of load between power stations, transmission loss equation. Introduction to unit commitment and dynamic programming. Unit-2 Power System Stability -I: Power angle equations and power angle curves under

steady state and transient conditions. Rotor dynamics and swing equation (solution of swing equation not included), synchronizing power coefficient. Introduction to steady state and dynamic stabilities, steady state stability limit. Unit-3 Power System Stability-II: Introduction to transient stability. Equal area criterion and its application to transient stability studies under basic disturbances, critical clearing angle and critical clearing time. Factors affecting stability and methods to improve stability. Unit-4 (i) Excitation Systems: Introduction of excitation systems of synchronous machines, types of excitation systems, Elements of various excitation systems and their control (functional block diagrams and their brief description)-DC excitation systems, AC excitation systems, brushless excitation system. (ii) Interconnected Power Systems: Introduction to isolated and interconnected powers systems. Reserve capacity of power stations, spinning and maintenance resaves. Advantages and problems of interconnected power systems. Power systems inter connection in India. Unit-5 (i) Tap Changing transformer, phase angle control and phase shifting transformer. Series compensation of transmission lines, location and protection of series capacitors, advantages and problems. (ii) Introduction to power system security. (iii) Introduction to voltage stability. Reference/Suggested Books 1. J. Nagrath and D.P. Kothari: Power System Engineering 2/e (TMH) 2. J. J. Grainger and W. D. Stevenson: Power System Analysis (TMH) 3. B. R. Gupta, “Power System Analysis and Design” Third Edition, S. Chand & Co. 4. C. L. Wadhwa, “Electrical Power Systems” New age international Ltd. Third Edition 5. W. D. Stevenson, “Element of Power System Analysis”, McGraw Hill. 6. B.R. Gupta,“Generation of Electrical Energy”, S. Chand Publication. 7EX6.1 DIGITAL SIGNAL PROCESSING UNIT 1 : SAMPLING - Discrete time processing of Continuous-time signals, continuous-time processing of discrete-time signals, changing the sampling rate using discrete-time processing. UNIT 2 : TRANSFORM ANALYSIS OF LTI SYSTEMS - Introduction, The frequency response of LTI systems, System functions for systems characterized by LCCD (Linear Constant Coefficient Difference) equations, All-pass MinimumPhase systems, Linear systems with linear phase.


UNIT 3 : STRUCTURES FOR DISCRETE-TIME SYSTEMS- Block diagram and signal flow graph representation of LCCD (LCCD - Linear Constant Coefficient Difference) equations, Basic structures for IIR and FIR systems, Transposed forms. UNIT 4 : FILTER DESIGN TECHNIQUES - Introduction, Analog filter Design: Butterworth & Chebyshev.IIR filter design by impulse invariance & Bilinear transformation. Design of FIR filters by Windowing: Rectangular, Hanning, Hamming & Kaiser. UNIT 5 : The Discrete Fourier transform (DFT), Properties of the DFT, Linear Convolution using DFT. Efficient computation of the DFT: Decimation-in-Time and Decimation-in frequency FFT Algorithms. Processing of speech signals: Vocoders, linear predictive coders. Reference/Suggested Books 1. Prokis & Manolakis – Digital Signal Processing: Principles, Algorithms & Application,

2. 3. 4. 5. 6. 7. 8. 9.

PHI. Salivahanan: Digital Signal Processing 2/e (TMH) Chen Chi-Tsong : Digital Signal Processing, Oxford. D. Sundarrajan, Digital Signal Processing, Cambridge Uni. Press.(World Scientific) Rabiner & Gold – Theory & Applications of Digital Signal Processing, Prentice Hall of India. Proakis, J.G. & Manolakis, D.G.,” Digital Signal Processing: Principles Algorithms and Applications”, Prentice Hall of India. Johnson, J.R., “Introduction to Digital Signal Processing”, Prentice Hall of India. De Fatta, D.J.Lucas, J.G. & Hodgkiss, W. S.,” Digital Signal Processing”, John Wiley& Sons. Schafer, Buck – Discrete Time signal Processing, Pearson Education Asia. 7EX6.2 COMPUTER AIDED DESIGN OF ELECTRICAL MACHINES

Unit-1 Basic Principles of Electrical Machine Design: Specifications, Factors affecting the design, Limitations, main dimension, loadings, output equation, factor affecting the size and rating, Electrical Engineering Materials: conducting, magnetic and insulating materials. Magnetic Circuit Calculation: Ohm’s law for magnetic circuit, mmf required for air gap and iron parts, tapered teeth, real and apparent flux density, magnetizing current. Unit-2 Heating and Cooling of Electrical Machines: heat dissipation and heat flow equations, Newton’s law of cooling, equations for temperature rise, Rating of Machines: Continuous, short and intermittent ratings, mean temperature rise, hydrogen cooling of turbo alternators, quantity of cooling medium. Unit-3 Computer Aided Design of Transformers: Power and Distribution Transformers, core and yoke cross sections, square and stepped core, output equations, main dimensions, types &, design of windings, optimization concepts. Unit-4 Computer Aided Design of Synchronous Machines: Turbo and Hydro alternators, choice of specific magnetic & electric loading, short circuit ratio and its effects, air gap length, output equation, main dimensions, flow charts for design of synchronous machine, design of stator core & winding. Unit-5 Computer Aided Design of Induction Machines: Output equation, main dimensions, design criteria, flow charts for design of induction motor, air gap length, design of stator core and winding, rotor design. Reference/Suggested Books 1. A. K. Sawhney, “A Course in Electrical Machine Design” Dhanpat Rai & Sons. 2. Generalized theory of electrical Machines by B. Edikins. 3. Electrical Machinery by Fitzegerald; Kingsley. 4. M.G. Say, “The Performance and Design of AC Machines” Pitman & Sons. 5. R.K. Agrawal – Electrical Machine Design 7EX6.3 OPERATING SYSTEMS UNIT 1: INTRODUCTION - History, Operating system services, types, responsibilities, generations, LINUX, WINDOWS. UNIT 2: PROCESS MANAGEMENT- Operations on process, Process state, Scheduling, Criteria, scheduling algorithms, Evaluation, Synchronization, Semaphores, Monitors.

UNIT 3: MEMORY MANAGEMENT- Swapping, Continuous memory allocation, Paging, Pure paging, Demand paging, Page-replacement algorithms, thrashing, ExamplePentium, Disk Scheduling. UNIT 4 : INFORMATION MANAGEMENT- File and directory concept, Access methods, Protection, Free space management, Efficiency and performance, Access matrix, Capability-based systems, Programthreats, User authentication, Firewall. UNIT 5 : DEAD LOCKS- System model, Dead lock characterization, Deadlock prevention, Avoidance, Detection, Recovery, Classic problems of synchronization. Reference/Suggested Books 1. A.S. Tanenbaum – Modern Operating Systems, Pearson Education Asia. 2. D.M. Dhamdhere – Operating Systems – A Concept based approach 2/e, Tata McGraw Hill. 3. Achyut Godble – Operating Systems, Tata Mc-Graw Hills. 7EX7 DBMS LAB 1 Designing database and constraints using DDL statements. 2 Experiments for practicing SQL query execution on designed database. 3 Database connectivity using JDBC/ODBC. 4 Features of embedded SQL. 5 Designing front end in HLL and accessing data from backend database. 6 Designing simple projects using front end-back end programming. 7 Project for generating Electricity Bills 8 Project for managing student’s attendance/marks details. 7EX8 POWER SYSTEM MODELLING AND SIMULATION LAB 1 Simulate Swing Equation in Simulink (MATLAB) 2 Modelling of Synchronous Machine. 3 Modelling of Induction Machine. 4 Simulate simple circuits using Circuit Maker. 5 (a) Modelling of Synchronous Machine with PSS (b) Simulation of Synchronous Machine with FACTS device. 6 (a) Modelling of Synchronous Machine with FACTS device (b) Simulation of Synchronous Machine with FACTS devices. 7 FACTS Controller designs with FACT devices for SMIB system. B. TECH. ELECTRICAL & ELECTRONICS ENGINEERING VIII-SEMESTER 8EX1 EHV AC/DC TRANSMISSION Unit-1 EHV AC Transmission: Need of EHV transmission lines, power handling capacity and surge impedance loading. Problems of EHV transmission, bundled conductors: geometric mean radius of bundle, properties of bundle conductors. Electrostatic fields of EHV lines and their effects, corona effects: Corona loss, audio and radio noise. Unit-2 Load Frequency Control: Introduction to control of active and reactive power flow, turbine speed governing system. Speed governing characteristic of generating unit and load sharing between parallel operating generators. Method of Load Frequency Control: Flat

frequency, flat tie line and tie line load bias control. Automatic generation control (description of block diagram only). Unit-3 Voltage Control: No load receiving end voltage and reactive power generation. Methods of voltage control. Synchronous phase modifier, shunt capacitors and reactors, saturable reactors, Thynstorised static VAR compensators- TCR, FC-TCR and TSCTCR. Unit-4 FACTS: Introduction to FACTS controllers, types of FACTS controllers, Brief description of STATCOM, Thyristor controlled series capacitors and unified power flow controller. Unit-5 HVDC Transmission: Types of D.C. links, advantages and disadvantages of HVDC transmission. Basic scheme and equipment of converter station. Ground return. Basic principles of DC link control and basic converter control characteristics. Application of HVDC transmission. Reference/Suggested Books 1. K.R. Padiyar – HVDC Power Transmission Systems. NEW AGE PUB 2. HVDC Power Transmission System, K.R, Padiyar, Wiley Eastern Ltd., 1990 3. E.W. Kimbark, Direct Current Transmission Vol: 1 Wiley Interscience, 1971. 4. J. Arrillaga, H.V.D.C Transmission, Peter Peregrines, 1983. 5. J. Arrillaga HVDC et. al, Computer Modelling of Electrical Power System. John Wiley 1993. 6. R.D. Begamudre, E.H.V. A.C. Transmission, Wiley Eastern Ltd., 2nd edition. 7. S. Rao, EHV-AC and H.V.D.C. Transmission Engineering Practice, Khanna publishers, 1990. 8. R. D. Begamudre, “Extra High Voltage AC Transmission Engineering” Wiley Eastern. 8EX2 ELECTRIC DRIVES AND THEIR CONTROL Unit-1 Dynamics of Electric Drives: Fundamental torque equations, speed-torque conventions and multiquardant operation, equivalent values of drive parameters, nature and classification of load torques, steady state stability, load equalization, close loop configurations of drives. Unit-2 DC Drives: Speed torque curves, torque and power limitation in armature voltage and field control, Starting, Braking-Regenerative Braking, dynamic braking and plugging. Speed Control-Controlled Rectifier fed DC drives, Chopper Controlled DC drives. Unit-3 Induction Motor Drives-I: Starting, Braking-Regenerative braking, plugging and dynamic braking. Speed Control-Stator voltage control, variable frequency control from voltage source, Voltage Source Inverter (VSI) Control. Unit-4 Induction Motor Drives-II: Variable frequency control from current source, Current Source Inverter (CSI) Control, Cycloconverter Control, Static rotor resistance control, Slip Power Recovery- Stator Scherbius drive, Static Kramer drive. Unit-5 Synchronous Motor Drive: Control of Synchronous Motor-Separately Controlled and VSI fed Self-Controlled Synchronous Motor Drives. Dynamic and Regenerative Braking of Synchronous Motor with VSI. Control of Synchronous Motor Using Current Source Inverter (CSI) Reference/Suggested Books 1. G K Dubey: Fundamentals of Electrical Drives, Narosa Publishing House, New Delhi. 2. V Subrahmanyam: Thyristor Control of Electric Drives, Tata McGraw Hill, New Delhi. 3. V Subrahmanyam: Electric Drives- Concepts and Applications, Tata McGraw Hill. 4. S K Pillai: A First Course on Electrical Drives, Wiley Eastern limited, India.

5. 6. 7. 8. 9.

G K Dubey: Power Semiconductor Controlled Drives, Prentice Hall, Englewood Cliffs. B K Bose: Power Electronics and A. C. Drives, Prentice Hall. G.K. Dubey, “Fundamentals of Electric Drives”, Narosa publishing House. M.Chilkin, “Electric Drives”,Mir Publishers, Moscow. N.K. De and Prashant K.Sen, “Electric Drives”, Prentice Hall of India Ltd.

8EX3 SWITCHGEAR & PROTECTION Unit-1 (i) Static Relays: Introduction to static relays, merits and demerits. Comparators: amplitude and phase comparators, duality between amplitude and phase comparators. Introduction to (a) amplitude comparators-circulating current type, phase splitting type and sampling type, (b) phase comparators-vector product type and coincidence type. (ii) Static over Current Relays: Introduction to instantaneous, definite time, inverse time and directional overcurrent relays. Unit-2 (i) Static Differential Relays: Brief description of static differential relay schemes-single phase and three phase schemes. Introduction to static differential protection of generator and transformer. (ii) Static Distance Relays: Introduction to static impedance, reactance and mho relays. Unit-3 (i) Carrier Current Protection: Basic apparatus and scheme of power line carrier system. Principle of operation of directional comparison and phase comparison carrier protection and,carrier assisted distance protection. (ii) Distance Protection: Effect of power swings on the performance of distance protection. Out of step tripping and blocking relays, mho relay with blinders. Introduction to quadrilateral and elliptical relays. Unit-4 Circuit Breakers I: Electric arc and its characteristics, arc interruption-high resistance interruption and current zero interruption. Arc interruption theories-recovery rate theory and energy balance theory. Restriking voltage and recovery voltage, develop expressions for restriking voltage and RRRV. Resistance switching, current chopping and interruption of capacitive current. Oil circuit breakers-bulk oil and minimum oil circuit breakers. Air circuit breakers. Unit-5 (i) Circuit Breakers II: Air blast, SF6 and vacuum circuit breakers. Selection of circuit breakers, rating of circuit breakers. (ii) Digital Protection: Introduction to digital protection. Brief description of block diagram of digital relay. Introduction to digital overcurrent, transformer differential and transmission line distance protection. Reference/Suggested Books 1. S. S. Rao, “Switchgear and Protection”, Khanna Publishers. 2. B. Ravindranath and M. Chander, Power system Protection and Switchgear, Wiley. 3. B. Ram and D. N. Vishwakarma, “Power System Protection and Switchgear”, TMH. 4. Y. G. Paithankar and S R Bhide, “Fundamentals of Power System Protection”, PHI. 5. T.S.M Rao,“Power System Protection: Static Relays with Microprocessor Applications” Tata Macgraw Hill”. 6. A.R. Van C. Warringtaon, “Protective Relays- Their Theory and Practice, Vol. I & II” Jhon Willey & Sons. 8EX4.1 IMAGE PROCESSING AND PATTERN RECOGNITION UNIT 1: INTRODUCTION: Imaging in ultraviolet and visible band. Fundamental steps in image processing. Components in image processing. Image perception in eye, light and electromagnetic spectrum, Image sensing and acquisition using sensor array.

UNIT 2: DIGITAL IMAGE FUNDAMENTALS: Image sampling and quantization, Representing digital images, Spatial and gray-level resolution, Aliasing and Moiré patterns, Zooming and Shrinking digital images. UNIT 3: IMAGE RESTORATION: Image restoration model, Noise Models, Spatial and frequency properties of noise, noise probability density functions, Noise - only spatial filter, Mean filter Statistic filter and adaptive filter, Frequency domain filters - Band reject filter, Band pass filter and Notch filter. UNIT 4: IMAGE COMPRESSION: Compression Fundamentals - Coding Redundancy, Interpixel redundancy, Psycho visual redundancy and Fidelity criteria. Image Compression models, Source encoder and decoder, Channel encoder and decoder, Lossy compression and compression standards. color space formats, scaling methodologies (like horizontal, vertical up/down scaling). Display format (VGA, NTSC, PAL). UNIT 5: EXPERT SYSTEM AND PATTERN RECOGNITION: Use of computers in problem solving, information representation, searching, theorem proving, and pattern matching with substitution. Methods for knowledge representation, searching, spatial, temporal and common sense reasoning, and logic and probabilistic inferencing. Applications in expert systems and robotics Reference/Suggested Books 1. Rafael C. Gonzalez – Digital Image Processing, Pearson Education Asia. 2. Kenneth R. Castleman – Digital Image Processing, Pearson Education Asia. 3. Nick Effard – Digital Image Processing, Pearson Education Asia. 4. Jain A.K. – Digital Image Processing, Prentice Hall of India. 5. SHINGHAL: PATTERN RECOGNITION: TECHNIQUES AND APPLICATIONS , Oxford 6. Jayaraman: Digital Image Processing (TMH) 8EX4.2 VHDL UNIT 1: INTRODUCTION - Fundamental & history of various hardware description language, Design flow of ASICs and and standard logic circuits using software. UNIT 2 : COMBINATIONAL CIRCUIT BUILDING BLOCKS- Multiplexer, Decoders, encoders, Code Converters, VHDL Code for Combinational Circuits. UNIT 3: SEQUENCIAL CIRCUITS: VHDL code for Flip-Flops, shift registers, counters. UNIT 4: SYNCHRONOUS/ ASYNCHRONOUS SEQUENCIAL CIRCUITS: Mealy & Moore type FSMs, VHDL Code for Mealy & Moore Machines, VHDL Codes for Serial Adder, Vending Machine. UNIT 5: DIGITAL SYSTEM DESIGN- Building Block circuits, Memory organization, SRAM, Design examples of divider, Multiplier, Shifting & Sorting Operations, Clock Synchronization, CPU organization and design concepts. Reference/Suggested Books 1. Stephen Brown and Zvonki Vranesic - Fundamentals of Digital Logic circuit VHDL Design 2/e, TMH. 2. Z. Navabi – Analysis and Modeling of Digital Systems, Tata Mc-Graw Hill. 3. D.L. Perry - VHDL 3rd ed., Tata Mc-Graw Hill. 4. Morris Mano – Digital Logic & Computer Design, Prentice Hall of India

8EX4.3NON-CONVENTIONAL ENERGY SOURCES Unit-1 (i) Introduction: World energy situation, conventional and non-conventional energy sources, Indian energy scene. (ii) Tidal Energy: Introduction to tidal power. Components of tidal power plants, double basin arrangement. Power generation. Advantages and limitations of tidal power generation. Prospects of tidal energy in India. Unit-2 Solar Energy: Solar radiation, solar radiation geometry, solar radiation on tilted surface. Solar energy collector. Flat- plate collector, concentrating collector - parabolidal and heliostat. Solar pond. Basic solar power plant. Solar cell, solar cell array, basic photo-voltaic power generating system. Unit-3 (i) Wind Energy: Basic principle of wind energy conversion, efficiency of conversion, site selection. Electric power generation-basic components, horizontal axis and vertical axis wind turbines, towers, generators, control and monitoring components. Basic electric generation schemes- constant speed constant frequency, variable speed constant frequency and variable speed variable frequency schemes. Applications of wind energy. (ii) Geothermal Energy: Geothermal fields, estimates of geothermal power. Basic geothermal steam power plant, binary fluid geothermal power plant and geothermal preheat hybrid power plant. Advantages and disadvantages of geothermal energy. Applications of geothermal energy. Geothermal energy in India. Unit-4 Nuclear Fusion Energy: Introduction, nuclear fission and nuclear fusion. Requirements for nuclear fusion. Plasma confinement - magnetic confinement and inertial confinement. Basic Tokamak reactor, laser fusion reactor. Advantages of nuclear fusion. Fusion hybrid and cold fusion. Unit-5 Biomass Energy: Introduction, biomass categories, bio-fuels. Introduction to biomass conversion technologies. Biogas generation, basic biogas plants-fixed dome type, floating gasholder type, Deen Bandhu biogas plant, Pragati design biogas plant. Utilization of bio gas. Energy plantation. Pyrolysis scheme. Alternative liquid fuels ethanol and methanol. Ethanol production. Reference/Suggested Books 1. Dr. A.N. Mathur – Non-Conventional Resources of Energy. 2. Boyle: Renewable Energy, 2E Oxford 3. S.P. Sukhatme – Solar Energy (TMH) 4. Duffie & Beckman – Solar Engineering of Thermal Processes. 5. BH KHAN: Non-Conventional Energy Resources, (TMH) 6. GARG & PRAKASH : Solar Energy : Fundamentals and Applications, TMH 7. Bio Energy by David Boyles, Elis Horwood Ltd., 8. Renewable energy sources and conversion technology by N.K. Bansal, M. Kleemann, M. Heliss, Tata Mc-Graw-Hill, 1990. 8EX4.4 ROBOTICS AND AUTOMATION Unit-I


Introduction Basic structure of Robotics, Resolution, Accuracy, and Repeatability, Position representation, Classification and structure of Robotic Systems-Point to Point Robotic Systems, Continuous Path Robotic systems, The manipulator Cartesian co-ordinate Robots, Cylindrical coordinate Robots, Direct and Indirect Drivers, The Wrist motions and Gripper, Structure of continuous path Robot Systems.

Drives and Control Systems:Hydraulic Systems, direct current servo motors, control approaches of robots, Denabit Hasten Berg convention, application of the D.H. Method, The Jacobian Matrix for position and orienting. Unit-III Application of Robots:Programming, Manual teaching Lead through teaching, programming languages, storing and operating task programs, Sensor and Intelligent Robots, Vision systems, Range detectors, Assembly aid devices, Force and Torque sensors. Artificial Intelligence Unit-IV Production Design for Robot Assembly;Production design for small parts assembly, production Design for robotic and automatic assembly, considerations for assembly oriented product design, Robot Safety. Unit-V Programming system:Robot languages in the eighties, A Robot programming systemincorporating Real time and supervisory control val.II.Programming vision and Robotic systems with RATE, Implicit Robot Programming based on high level explics systems. Reference/Suggested Books 1. Fu K, Gonzalez R and Lee C, Robotics - Control Sensing Vision & Intelligence, TMH. 2. Craig J J, Introduction to Robotics, Mechanics and Control, Addison Wesley, 1993. 3. McKerrow P J, Introduction to Robotics, Addison Wesley, 1993. 4. Selig M, Introductory Robotics, Prentice Hall, 1992. 5. GHOSAL: ROBOTICS, Oxford 6. Saha: Introduction to Robotics (TMH) 8EX5 INDUSTRIAL ECONOMICS & MANAGEMENT 1 Money Banking and Trade: Functions of money, supply & demand for money, money price level & inflation, black money, meaning, magnitude & consequences. Functions of Commercial banks, banking system in India, shortcomings and improvements.. Function of RBI, monetary policy-making, objectives and features. Sources of public revenue, principles of taxation, direct and indirect taxes, Theory of international trade, balance of trade and payment, Foreign exchange control, devaluation New economic policy: Liberalization, extending privatization, globalization. 2 Management Principles: Management functions, responsibilities of management to society, development of management thought. Nature of planning, decision making, management by objectives, Line and staff authority relationships, decentralization and delegation of authority, span of management. 3 Production Management: Production planning and control, inventory control, quality control and Total quality management. Tools of project management - CPM, PERT, project information systems. Marketing functions, management of sales and advertising marketing research. 4 Human Resource Management: Function, application of industrial psychology for selection,training and recruitment. Communication process, media channels and barriers to effective communication, theories of motivation, leadership.

5 Finance and Account Management: Engineering Economics: Investment decision, present worth, annual worth and rate of return methods. Payback time. Need for good cost accounting system, cost control techniques of financial control, financial statements, financial ratios, break-even analysis, budgeting and budgetary control. 8EX6 ELECTRICAL DRIVES AND CONTROL LAB 1 Study and test the firing circuit of three phase half controlled bridge converter. 2 Study and obtain waveforms of 3 phase half controlled bridge converter with R and RL loads. 3 Study and test the firing circuit of 3-phase full controlled bridge converter. 4 Study and obtain waveforms of 3-phase full controlled bridge converter with R and RL loads. 5 Study and test 3-phase AC voltage regulator. 6 Control speed of dc motor using 3-phase half controlled bridge converter. Plot armature voltage versus speed characteristic. 7 Control speed of dc motor using 3-phase full controlled bridge converter. Plot armature voltage versus speed characteristic. 8 Control speed of a 3-phase induction motor in variable stator voltage mode using 3phase AC voltage regulator. 9 Control speed of universal motor using AC voltage regulator. 10 Study 3-phase dual converter. 11 Study speed control of dc motor using 3-phase dual converter. 12 Study three-phase cycloconverter and speed control of synchronous motor using cycloconverter. 13 Control of 3-Phase Induction Motor in variable frequency V/f constant mode using 3phase inverter.


Rajasthan Technical University Kota Teaching and Examination

Rajasthan Technical University Kota Teaching and Examination Scheme for B.Tech. (Four year courses) Branch Electrical & Electronics Engg. Year II ...

552KB Sizes 9 Downloads 24 Views

Recommend Documents

rajasthan technical university, kota office of the controller of
KRITIKA TIWARI. 10EMICS063. 3E2072. ELECTRONIC. DEVICES & CIRCUITS. 15.10.2014 10:00 am to 3:00 pm. 14. MANISH BERI. 12E

Rajasthan Technical University, Kota Detailed Syllabus for B.Tech
Machine dependent and independent features of loaders, Design of bootstrap, absolute and relocatable loaders, Design of

Download - Rajasthan Technical University
Reference Books: (1) Strength of Materials of Structure, B.C.Punmia – Laxmi Publications (P) Ltd., New Delhi – 2006

Agricultural Engineering - Rajasthan Technical University
SN. Name of Authors /Books /Publisher. Year of. Publication. 1 H.C. Saxena. Text Book of Finite Differences and Numerica

b. arch. - Rajasthan Technical University
Mar 18, 2016 - 10. 10E1AAARF4XP018. 10EAAAR018 ANJI SIDDIQUI. AFZAL AHMAD SIDDIQUI. Aayojan School Of. Architecture, Jai

MBA Syllabus - Rajasthan Technical University
FUNDAMENTALS OF MANAGEMENT. Course/Paper : M-101. MBA Semester-I. No. of Lecture Hrs/week: 03. Internal Marks: 30. Total

Rajasthan Technical University (RTU) Mechanical Engineering
1. Rajasthan Technical University (RTU). Mechanical Engineering. YEAR II / SEMESTER III. THEORY. S. No. Code. No. Subjec

1. Solar Energy Handbook, Kreider, J.F. and Kreith, F., McGraw-Hill 1981. 2. Alternative Energy Sources, T.N. Veziroglu,

strength of materials - Rajasthan Technical University
Anand. 2. Strength of Materials & Mechanics of Structures: Vol. I, II by Dr. B.C. Punmia Laxmi Publications. (p) Ltd. RE

MECHANICS OF SOLIDS - Rajasthan Technical University
TEXT BOOK. 1.Mechanics of Materials, James M. Gere, Cengage Learning (Brooks\Cole). 2.Mechanics of Materials, Beer, John